Jump to content
SAU Community

Recommended Posts

Hi Guys;

i don't mean the normal heat up/dump oil/refill/run a bit/dump again/ refill (last refill optional if you're like some people i've seen). my local import garage has a box (yep not a drum) with 'engine flush' written on it and this stuff goes in the oil filler cap.

theoretically good i guess, particularly since we hear about imports with built up sludge etc. and what happens when said sludge decides to dislodge and start traveling around to visit mr lifter.

what i can't figure out is what this flush stuff does to get rid of what's already in the engine - the only thing I know that gets rid of oil sludge is a solvent and none if that will go near my engine internals.

cheers and thanks for any feedback

I probably wouldnt use one in your engine if it has no problems Just stick with a good oil. If you have a noisy lifter then be cautious when you use it. You dont want junk plugging up your oil pickup screen if the engine is seriously sludged.

Engine flush is known to dis-lodge any thing thats in your engine and contains some hard core solvents when flushed can cause metal shavings to get stuck in bearings or move some sludge thats blocking a small crack id stay clear of that if you want to flush just repeat the steps heat up/dump oil/refill/run a bit/dump again/ refill its the best system

I agree with what has been said above.

You dont want to run these so called cleaners around the engine, it can dislodge alot of stuff, possibly causing leaks from seals, blocked oil galleries etc etc.

Just asking for trouble.

I remember a few of my TAFE teachers years ago, saying that Diesel Oil is good for this purpose, as its very high in detergent and cleans it after a day of running.

But once again you run the chance of problems i guess.

lol we ran kero/oil thru the datto and it cleaned out the old gunk nicely.

wouldnt really recommend it for a car I actually liked tho :D

just run some cheap oil thru for a couple of hundred kays, and repeat.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah nice idea, you mean to suction it to the gauges? I hadn't thought of that.
    • A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • Tow a boat... people won't know wtf is going on 🤣 
    • I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
×
×
  • Create New...