Jump to content
SAU Community

Recommended Posts

just get the Pfc from Nengun or Greenline. New they are cheaper then what ppl ask for 2nd hand ones locally:) Nengun had mine on my door within 5 days of funds clearing. Whether the Apex Eng RB20 PFC is a beat up, or perhaps importers have wojen up to the local demand, they arent near as hard to come by these days

http://www.greenline.jp/catalogue/bccatpar...ory=electronics

APEXi Power FC More Info 4E14N07Z

(Computers and Sub Computers) ¥95,403

A.P. Engineering Special. Manual transmission only. Only compatible with low impedence injectors.

Nengun were about ¥1500 cheaper

Thanks Both for your help

Roy - I think nengun sounds like the GO! I didnt think it would be as quick as 5 days! $1600 is not bad for Power FC and hand controller!

Spoolup - Im very interested in your GTR injectors and have sent an email yo you asking you a few questions!

Well once my funds had cleared... i think that took 3 days, i received the Pfc somewhere around 5 working days later. I got my habd controller from Greenline...all up it cost me $1440 delivered to my door...good luck with it

...oh and if you use GTR injectors, dont forget you will need the resistor pack...o website says the Pfc doesnt need them (i think nengun) but its a typo, RB20 uses high impedence injectors, therefore so does the Pfc:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...