Jump to content
SAU Community

Recommended Posts

  • Replies 300
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

mine made the noise ALOT more after i installed my front mount. i also have a APEXi dual chamber BOV and didn't adjust it for the first run after that and it sounded really good but i wouldn't leave it like that.. you'll kill the turbo.

you think about it, the turbo is spinning one way then when you get off the gas all this air has to go somewhere. that place is back through the turbo which is spinning the other way.. thats when you hear the chop noise.

Peformance wise, wouldnt it be better to have a complete plumback system wired to flow back just after the airpod? By doing that wouldn't it reduce turbo lag?

Thats an interesting question. Although, it does sound logical......

Has a plumback system been designed this way? Or anybody using this setup?

Steve.

Yes thats right.

My car came with the factory valves blocked and it was SHIT.

It fluttered and was laggy.

So I had the plumback reinstated and now it works BETTA.

I can't believe that you care about

some poxy sound resulting from a flawed setup, rather than

having you car working properly.

Why don't you make a recording of it and just play it on your stereo?

Or is it for everyone else to hear.

as some were asking before, you need an aftermarket air filter to HEAR the flutter because it has less restriction. you may even have the same flutter with the stock air box, but you just cant hear it. but the sound does come from compressor surge.

r33zilla : you will NOT get flutter with a HKS ssqv, believe me i've been there done that. the ssqv was designed to elimnate EVERY possible effect of compressor surge and flutter, its just the way its engineered and designed. you will only achieve the faintest flutter, which you will barely even hear.

hope that helps

if u have a stock bov, and an air filter with a large surface area such as an HKS or TRUST one u will get little flutter.. But if u got an after market BOV running stock boost and u got an air filter it will flutter pretty loud... The reason y u dont need to remove ur aftermarket BOV is cause the spring inside it is really tight and only releases when ur on high boost (8-12psi or whatever).. The Stock BOV has a very soft spring... Once u get an airfilter ur car should flutter at low revs, but once u get above 5000 rpm, it will go tshhhhhh the normal sound which is normal.. I had a stock R33 and did that and got alot of flutter.. When i put my front mount on it was even louder, and when i changed the piping to stainless steel igot even louder lol!!! It is pretty mad, but be careful with what air filter u buy cause some dont filter as good as others.. But if u just want the sound, defenitely buy a HKS mushroom or a TRUST Arinx one for abt 100 bucks second hand they always for sale.. And changing the stock air filter to the pod is very simple, shouldnt take more than 40 minutes if u got the right tools..

hope that helped..

Rob

ahaha this question plagues every forum.

To enhance your 'Flutter'

you will need a AfterMarket POD Filter.

an AfterMarket Intercooler will help amplify the sound

Different sized turbos will also depend on how loud, how deep, how high pitched

The big thing, is having steel piping from the turbo to the pod filter. Usually its plastic from the factory and people rarely change it as its not really necessary... but changing this pipe to a steel one, will help amplify the sound.

People will argue to death that it kills turbos and whatever, and its more laggy all kinds of stuff... and really, its horses for courses - whatever you prefer.

I had a bov on my vl turbo, the spring in it died and the bov was useless (could not hold more than 7psi boost and would open up sounding like an external wastegate but losing all horsepower), that sucked... it was a TurboSmart Type III. after that i just took it off and had the hole welded up.

I had a bov on my R32, and it wasnt placed properly (it was not hidden)... stuck out like dogs balls, and as soon as a cop pops your bonnet, they think its christmas when they see it, because they dont know fcuk all about cars, but they know what bovs look like and they know it shouldnt be there...

I remember i told a cop it was standard, argued the point and got away with it. But i removed it anyway.

Bloody posers.

It's full sick.

I have a s15 stock re-circ. If take your foot off the accell quick enough when on full boost you still hear crazy woosh for some reason (I thought that wasn't meant to happen with a re-circ)... this thread makes me worry now maybe it's not up to the job but I'm only running .8 bar or so. :confused:

I still don't understand why people want these noises - just get a bigger turbo and make noise with the wastegate :(

This thread is gay.

The "flutter" sound (not to be confused with the sound from a sequetial BOV) is compressor surge, it happens when the compressor is operating severly out of its efficiency range, it is not a good thing.

So when I hear a car drive past fluttering between gears, I dont think "fully sick man", I think "that car is set up like shit, and that tool thinks it is great"

If you want it to be louder,

1)block up the BOV (causes the compressor to operate at essentially zero flow when changing gears) ie; way out of its efficiency range,

2) get a pod filter - stock box is designed to muffle the sound,

3) FMIC - larger volume of compressed air for the compressor to work against (at zero flow) during gear changes.

All that should reault in a longer louder flutter to tell people your car is fu(ked.

Sorry if I have offended anyone.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Out of curiosity, how do you cover up the inspection hole? Surely it doesn't sit open like that, right? With grime and dirt coming in and oil going out?
    • Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...