Jump to content
SAU Community

Recommended Posts

Hey all,

A mate of mine and i were discussing the other day, Nitrous oxide.

He was telling me that you can run a 50 shot of nitrous and it can be beneficial to ure engine (as it cools down the pistons a bit aswell as the rest), rather than destroy it.

Im pondering possibly doing this to my own car... but would like some opinions first. Has anyone here got a nitrous setup in their car? running stock internals etc? Does anyone know roughly how much it would cost to get installed?

All info/opinions appreciated :(

Link to comment
https://www.sau.com.au/forums/topic/60796-nitrous/
Share on other sites

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Hey, coulda told you this before but I think I forgot to. Seen a stock Ti R31 running 50 shots down the drags with complete stock internals. He claims to have done 54 passes at that point with it and it didn't miss a beat. Got some nice low 14s which is good considering there normally people trying to pull a high 15 in stock form!

Link to comment
https://www.sau.com.au/forums/topic/60796-nitrous/#findComment-1151585
Share on other sites

NOS is the "SHIT"! :)

I run an 80hp wet shot & the HIT is better than Viagra!

When set up propperly is is a safe & effective hp gain , tho getting it right can be an absolute BIATCH..... as those who were present at my first effort will testify.

As a result of this.....only a WET shot is worth doing (wet shot is where the correct ammount of fuel is injected with the nos).

I use Geogre at ADRENALINE for all Nos related stuff.... he's seen it all.

Go the Gas :burnout:

Link to comment
https://www.sau.com.au/forums/topic/60796-nitrous/#findComment-1151729
Share on other sites

good to hear rep003,

so how much for somthing like this? do you still find it to be safe? I have always wanted to put it on but everyone always seems to say oh but this can go wrong and that can go wrong.

Plus not too mention the pic i saw recently were the whole engine blew up of the drag car when the lines caught fire! the whole bonnet flew off!!

Link to comment
https://www.sau.com.au/forums/topic/60796-nitrous/#findComment-1151789
Share on other sites

MirKz, i was once into nos as i through it was cheap hp, if you look at the nos website they have different setup for different power lvls, i belived anything over 300hp they requirment you run forged internals.

i belived rev210, uses it in his car, and i think it was something like 100shot and he had good results also

Link to comment
https://www.sau.com.au/forums/topic/60796-nitrous/#findComment-1151915
Share on other sites

good to hear rep003,

so how much for somthing like this? do you still find it to be safe? I have always wanted to put it on but everyone always seems to say oh but this can go wrong and that can go wrong.

Plus not too mention the pic i saw recently were the whole engine blew up of the drag car when the lines caught fire! the whole bonnet flew off!!

croyden GTR did the same thing, only with his, when he reved and started a burnout, nos thought he was racing, so it put a shot in and had no where to go but up, and lets just saw, the bonnet only just stayed on.

Link to comment
https://www.sau.com.au/forums/topic/60796-nitrous/#findComment-1151980
Share on other sites

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
×
×
  • Create New...