Jump to content
SAU Community

Recommended Posts

what skylines in australia have the most power at the wheels?both gtr & gtst?

Are you talking outright figures?Or road rego'd,dyno-queen,drag car(which would prolly be the outright record,I'm guessing...)?I think RB30-POWER would be right in saying Mario's R33,GTR-700,would be it,but then again,I've never seen an official dyno sheet...drag racers are really coy about letting figures be known!Most are happy to talk up their "easy 800kw" cars,but LeeWah's is about the biggest hitter(GTR) in Oz,that I can think of,that has a printout to prove it.

Link to comment
https://www.sau.com.au/forums/topic/61157-bigest-power/#findComment-1156915
Share on other sites

In Oz, there is without a doubt the Mario's GTR700 is the most powerful.

I guess you could split this into 2 different categories, race and street regoed cars.

In the race category I'd put the following (as judged by ETs and trap speeds):

GTR700 R33 GTR

Kier Wilson R32 GTR

Munro R33 GTR

In the street category, I'd include the following:

Theo's R32 GTR

LeeWah R33 GTR

RacePace R33 GTR

Ice Performance R32 GTR *

IWIN R33 GTR *

* - Has not recorded a time on the drag strip but publically run dyno runs have been recorded.

Link to comment
https://www.sau.com.au/forums/topic/61157-bigest-power/#findComment-1156956
Share on other sites

Nowhere did I mention I had more power than IWIN. IWIN was mentioned on the list of most powerful cars.

I was only judging a cars power by drag strip times as dynos read differently depending on calibration so the only way of getting a half accurate reading is at a drag strip. IWIN (as far as I know) has not made a pass down the strip so it was hard to tell where it would fit in the World of Powerful GTRs.

Link to comment
https://www.sau.com.au/forums/topic/61157-bigest-power/#findComment-1157143
Share on other sites

A while ago,the guys from Sub Zero in QLD had a head kicking GTS-T...can't remember power figures exactly,but it was a tough unit...I'll zip through my Zoom mag's to see if I can dredge it up,even if it's only a reference point...

Link to comment
https://www.sau.com.au/forums/topic/61157-bigest-power/#findComment-1158821
Share on other sites

A while ago,the guys from Sub Zero in QLD had a head kicking GTS-T...can't remember power figures exactly,but it was a tough unit...I'll zip through my Zoom mag's to see if I can dredge it up,even if it's only a reference point...

That would have been TRY-09 which ran some very tidy numbers in QLD. There was an article for it in HPI awhile back too.

Oh and OBEHAVE and BIGPSI (I believe which is a GTS-T) are another couple powerful GTS-Ts running around and pulled nice numbers on the strip. There is also another red 3L GTS-T running around Melb owned by a certain FunBoy looking Fang Artist.

I was only quoting GTRs as I don't follow the GTS-T scene as much. If someone else wants to list the most powerful GTS-Ts going around, feel free :(

Link to comment
https://www.sau.com.au/forums/topic/61157-bigest-power/#findComment-1158920
Share on other sites

thanks for the input. I have an r32gtst that makes 779.7rwhp hopefully in the next couple of months ill run it down the strip.  thats why i asked for gtst as well.

Frig, that is a big number. Obviously not a RB20.

Any specs you want to share, RB26DET or RB30DET?

Link to comment
https://www.sau.com.au/forums/topic/61157-bigest-power/#findComment-1160532
Share on other sites

thanks for the input. I have an r32gtst that makes 779.7rwhp hopefully in the next couple of months ill run it down the strip.  thats why i asked for gtst as well.

HOLY CRAP! I take it there's a dyno sheet to back you up? That can't be a RB20.. Whadda ya got? Or are you waiting to spring a suprise on someone?

Link to comment
https://www.sau.com.au/forums/topic/61157-bigest-power/#findComment-1161174
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...