Jump to content
SAU Community

Recommended Posts

Well, i just bought some 550cc injectors, and await them to ship to me from the good old states ...

$405USD for fully cleaned, flow tested, and matched to within 3% of each other ...

they are a direct drop in replacement for the rb25 !!!

available upto 650cc !

http://www.deatschwerks.com/products.html

just letting you guys know as this does seem like a pretty good deal ... and they take paypal !

Link to comment
https://www.sau.com.au/forums/topic/61175-cheap-injectors-ish/
Share on other sites

mmm i got my friend  Sard 550cc injectors for an Rb25 for $600 (New in Box & incl. shipping from Japan)

So yeah, you did well !

Yeh?? Thats bloody cheap, where from. I think from memory somebody on SAU said those injectors 'sard 550s' can be a bit of a bitch to fit onto the RB25.

I have a good friend of mine that lives in Japan, he will send me anything i want. So basically there is no mark up on the cost of whatever i buy.

He constantly says that because he is from abroad (he is australian) he is treated really well and gets fantastic deals from workshops etc.

I dont see how they can be a 'bitch' to fit? My friend had his injectors installed by Amberleys and there was never any fuss... How can they be a bitch to fit? They were Side Feed injectors *shrugs*.

I dont see how they can be a 'bitch' to fit?  My friend had his injectors installed by Amberleys and there was never any fuss... How can they be a bitch to fit?  They were Side Feed injectors *shrugs*.

Man i dont know, i read some thread about someone recommending the nismo ones over the Sard ones because they were an easier fit... or was that the sard ones were an easier fit... :) Hahah I'll take ya word for it.

  • 2 weeks later...

ok, the injectors arrived, and luckily i did not get stiffed for GST .. rar !!

anyway, well packaged, each inj has been marked with a number, and that number references the service report that was included, out of the 6 inj they flow :

report also shows in lbs/hr and has a nice little flow correction for psi chart.

553cc, 564cc, 564cc, 564cc, 569cc, 571cc

this is a 96.8% balance

hmm, i wonder which inj will be in #6 :)

they also tell me the impedance load of each injector

Injectors also came with a nice little 'how to fit' instruction sheet ...

they are physically in good condition, with all new o-rings, and are physically clean looking

I would deffo recommend this company to others http://www.deatschwerks.com/products.html

they respond to emails quickly, and the whole thing has been hassle free !

now to fit them, and get the pfc tuned ...

will post up results as and when i have them

Yeh?? Thats bloody cheap, where from.  I think from memory somebody on SAU said those injectors 'sard 550s' can be a bit of a bitch to fit onto the RB25.

they are a straight swap and easy to fit so i have heard.they need collars to make them fit properly,other than that it doent take much more effort than say fitting a set of nismo 555cc injectors.

currently running .9 bar, with these in, and the pfc, well .. who knows, depends on what the dyno guy can get out of the engine ... but i'm not really limited on boost at the moment with eh gcg highflow ... reading up, 1.2bar seems to be the max for std internals, so i guess maybe 1.1bar ... all depends on the dyno and the pfc

will post results when i have them !

How's this going?

Just an info I received from them about these injectors

the RB25 injectors are the same fitment as SR20

injectors. the injectors will fit both without any

modification (direct swaps). They are high-flowed

JECS (OEM nissan) which have been completely rebuilt,

tested, and matched.

i have NO idea on the flow pattern etc - i can only tell you that my mechanic fitted them yesterday, and they slotted into the RB25 head with ZERO problems. They were a direct replacement !

pfc was installed and tuned at the same time, but is not fully finished yet, currently making 212rwkw on a dyno that reads TRUE kw, not a rosy looking kw figure, aparently ...

anyway, should be getting the car back either tonight or tomorrow and will have more info then.

the tuner seemed quite happy that the injectors were doing the job they needed to do perfectly well ...

cheers

A reply I got from David of deatschwerks:

The spray pattern is different, anyone that tells you

otherwise is not being honest. I have had 3 different

injector technicians flow test them and they all said

they are fine. It is a stock conical pattern but the

spray is tigher than stock. This is true of any

larger than stock injectors. In addition, I run these

in my car and my local customers' cars. None of us

have had idle problems or loss of fuel economy. I

also have a steady 14-15 AFR at an 850rpm idle.

Either way it seems like the set tang0 bought are working fine in his car

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When: 5 & 6 September 2025 Where: Sydney Motorsports Park Join SAU NSW at World Time Attack Challenge 2025 at Sydney Motorsport Park. Plans will be finalized closer to the day, but make sure you lock in the days in your calendar now!
    • When: 9th August 2025 Where: Meet details to follow, budget half a day for just the museum part of the cruise, or a full day if you want to come up the range with us after! Join us for a cruise to Albion Park to visit the Historical Aircraft Restoration Society Aviation Museum for their August open Tarmac weekend. Walk around the hangers and see these amazing classic aircraft up close. After a two hour break to look around you are welcome to join us in heading up Macquarie Pass to the Robertson Pie Shop for a bite to eat. After a bite we will head back down Jamberoo Mountain Road before returning to Sydney. Full details to follow, for now lock in the dates into your calendar!
    • This is a school night cruise! Join us for a mid week night cruise up the Old Pac. We will stop at McDonald’s in Gosford for a quick break then come back the same way. Date: Thursday, 26th June 2025 Meet Location: Cowan Truck Stop (Pacific Motorway - Refer to Map) Meet Time: 7:30pm for a 8:00pm departure Destination: Gosford McDonald's (65 Pacific Highway, Gosford West) Map: https://maps.app.goo.gl/wi7jcuGxpJsoKtJB8 This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our track days. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave.
    • Join us for an epic Saturday at JDM Festival! We'll kick things off with a feed at Big Fat Greek Campbelltown to fuel up with some delicious eats and good vibes. After the feast, we’ll cruise over to Sydney Motorsport Park for the main event: JDM Festival! Please note: space is limited and depends on the number of SAU NSW members who commit to attending. To help us plan accordingly, we appreciate your timely registration. Date: Saturday, 14th June 2025 Meet Location: Big Fat Greek, 2 Rennie Rd, Campbelltown NSW 2560 Meet Time: 2:30pm for a 5:00pm departure Destination: Sydney Motorsport Park, Ferrers Rd, Eastern Creek NSW 2766 Important Information: Spots are limited and will be allocated on a first-come, first-served basis, with priority given to current financial members. REGISTER YOUR INTEREST HERE This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our track days. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • You'd want to cap off the re-entry back into the dump too. Just something flat that can be held on by the Vband.
×
×
  • Create New...