Jump to content
SAU Community

Recommended Posts

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

I voted OTHER because I have found that light colours and cars don't mix. These shirts aren't cheap so if youget anasty stain/mark on it it is ruined. I would go for darker colours.

blue (GReddy blue) bottom

black top

metal buttons (brushed alloy)

Also make sure you get the bottom straight cut so you can wear them un tucked.

my $1.75's worth

Cam

Link to comment
https://www.sau.com.au/forums/topic/614-shirts/#findComment-15328
Share on other sites

Originally posted by BY BY

Has anyone tried Hi PSI clothing yet to see what they actually charge?

might be worth a looksie

the shirts will be organised in good time.. when the time comes that we can start legitimately accepting member's we will organise tshirt's and sticker's etc..

no point in having t shirts before the club exists :mad:

Link to comment
https://www.sau.com.au/forums/topic/614-shirts/#findComment-16073
Share on other sites

Damn, Probrably should have done a little more research before starting this poll. Anyways, What sort of club to we want to come across? Casual or Classy? If casual, i say we go for normal T-Shirts. If Classy, we go for Polo's or Pit-Style shirts etc..

I'm leaning towards the classier stuff, that way we can look sexy at club meetings :)

I think jumpers or jackets would also be a GREAT idea so we can still show that we are from the club during the colder weather. Jackets will be kinda expensive i think, but jumpers should be cheap as the t-shirts.

Just some more ideas.

Ryan

:looney:

Link to comment
https://www.sau.com.au/forums/topic/614-shirts/#findComment-17476
Share on other sites

  • 3 weeks later...
Guest | hype^ |

jackets are defiatly a go!!!

if anything id prefer a jacket rather than the shirt!

we should definatly get both.. :P

and they dony have to be like fancy nimo ones or anything..

just a plain stlyish jacket that we can put our logos on.

if we get some sponsers and put them on too im sure itll work out for the best for every1 :O

we should have like www.SKYLINESAUSTRALIA.com on the front lefthand side

and a big logo on the back.. the logo from the top left of the page!! :uh-huh: :uh-huh:

Link to comment
https://www.sau.com.au/forums/topic/614-shirts/#findComment-26361
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
    • One way of putting the fuel surge idea to rest, is that even when in neutral/clutch in or free revving it still has the same issue, it can’t even get to limiter (7800) so to me that says it can’t be g force, I’m not trying to argue I just want to find the f&$king issue 😡
×
×
  • Create New...