Jump to content
SAU Community

Recommended Posts

Does anyone know how to remove the rear seats ( so as to remove the parcel shelf for speaker and grille replacement) ?

I have taken the two bolts out, but theres two nylon looking clips that are holding it in and I cannot work out how to release them... I can see on one of them (which I am thinking might be in backwards) a little tab at the back of it... I am thinking this is supposed to be pushed (but I think the bracket is backwards as this is at the back behind the steel loop from the seat frame.

Any one offer any advice?

Thanks

Conrad

Link to comment
https://www.sau.com.au/forums/topic/6142-removing-rear-seats/
Share on other sites

I'm so glad someone else had problems with getting the rear seats up.

After about 40 minutes of swearing I found out that basically you grab the seat really good just near the nylon thingy and pull straight up towards the roof. And pull HARD....

The other way of doing it (and it's a bit more controlled !!!) is to get a loooong screwdriver in next to the nylon thingy and leaver the seat up.

Basically all it is and a thick loop of wire on the seat that is pressed into the nylon thingy that mounts into the floor. And it's a damn tight fit.

J

Link to comment
https://www.sau.com.au/forums/topic/6142-removing-rear-seats/#findComment-92405
Share on other sites

Guys, if you search the site, you'll find th answer (I know cause I asked the same thing)

You just get a big mutha of a screw driver - stick it between the bottom of the seat and the chassis - then heave it !!!

I've done this now 8-9 times - works every time - no damage done.

Link to comment
https://www.sau.com.au/forums/topic/6142-removing-rear-seats/#findComment-92593
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...