Jump to content
SAU Community

Recommended Posts

The RB26DETT wont go behind the auto box...

 

But it will go in front of it :D

 

Your main problem would be the electronic control of the auto...  I doubt the RB26DETT ECU sends the correct signals to the auto ECU

Just so I can be a smartarse like you...

Depends on which way you are looking at the car :)

BTW, if your running an aftermarket ecu (as Id guess you would be going for a drag set up) then is the ECU really going to be sending messages to the gearbox? And would you not be going for a nice big built box with a big stall etc???

Hahah well I consider the front of my car to be umm.... the front... You know... the bit... that you sit... behind... :confused:

Yeah I was asuming he was talking about a standard 33 auto box... If he's talking Powerglide, et al, disregard my electronic control comments... And add in bellhousing / crossmember comments...

Keep an eye on Zoom magazine, they are doing a 4 door R33 with Auto RB26.

would you mind helping a fellow out and post the email address or contact info for ZOOM magazine. We don't get this rag where I live, and would like to contact them to see if I can buy a full subscription up front, and pay the extra to send them to me....

Thank you for any help with this... :(

joel

would you mind helping a fellow out and post the email address or contact info for ZOOM magazine.  We don't get this rag where I live, and would like to contact them to see if I can buy a full subscription up front, and pay the extra to send them to me....

Thank you for any help with this...  :(  

joel

should be able to contact them through here www.hpi.com.au

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...