Jump to content
SAU Community

Recommended Posts

Well today is the day I enter the well trodden path of registering an import.

I have my inspection at 1:30 today. I would be lying if I said I wasn't nervous. I'm starting the day with a wash of the car and vacumn. I'm hoping the nicer the car looks, the less chance of failing there is (fools gold I know). I shall report after the actual inspection with tales that will chill your blood, turn your wine to water and make you want to buy an aus delivered car! :bs!:

Mark - The not so chosen one.

Link to comment
https://www.sau.com.au/forums/topic/61757-chronicles-of-dickson-the-vr4-affair/
Share on other sites

I've heard it's better to have heaps wrong than a few things, because if there's heaps wrong, and they're easy fixes, they probably overlook the bigger problems which are less obvious and harder to fix.

Take it to Jacko's - they're just across the road from the Dickson Pits and do NRMA inspections.

I took my car there and passed easy. Then just walk across the road to the registry and you're done!

mivec u must be thinking of road worthy certificates (RWC) - for transferring registrations and stuff

Mark has to go thru the pits...a bit different, and harder.

gl mark, sell me your cooler!

Ummm, I think Mivec is actually right - when I got my R33 registered in the ACT the motor registry people told me that I could get a mechanical inspection done at any authorised inspection station, but only Dickson could do the "identity check" which is required when transferring a privately owned vehicle from another state. I think Dickson used to do all import mech inspections, but that changed some time ago.

I decided to kill two birds with one stone and get both done the same day at Dickson, but in hindsight if I hadn't been doing the id check would have definitely gone elsewhere for the normal inspection.

The car is a 15 year old import, it has to go over dickson.

And talked to Mark not long ago, it was failed as it needs engineering certificate to proove all the complaince items have been installed (as they arnt complianced like normal imports). Also needs steering rack boot or some crap.

The car is a 15 year old import, it has to go over dickson.

And talked to Mark not long ago, it was failed as it needs engineering certificate to proove all the complaince items have been installed (as they arnt complianced like normal imports). Also needs steering rack boot or some crap.

Thank you nik :Bang:

Anyway, yes I failed. The three things were:

Engineers Certificate

Split Steering Arm Boot

Oil Leak/s

Shell, I did get the old guy, he's a champ. He said "Those twin cams can get pretty expensive *grumble grumble*" . Nicest RTA type fellow I'd ever met.

Anyway, I have now got the car booked in tomorrow for the fitting of side intrusion bars (ouch) and fixing the other problems. Engineer should be Thursday and then the reinspection....

Duy, you can buy my cooler when Amaru sells me his haha.

Stay tuned for more exiting installments of - "The Dickson Chronicles - The VR4 Affair" :headbang: :bananaman:

Well I took some photos but they are really hard to read, so I"ll just list exactly what he checks:

Owners Name

Address

Rego Number

Body Type

Monty/year of manufacture

Engine number

Engine capacity

Chassis/Vin number

Unladen Mass

Odometer reading

Engine, tansmission and driveline

exhaust

seatbelts

fromt/rear suspension and axles

braking system/steering

Wheels and Tyres

Side intrusion bars

Seating

Child restraints

Tyre placard

Drivers side mirror

Centre high point brake lamp

suspension hight

After all that he says "This vehicle has been modified using correct engineering practices and workmanship. The changes comply with the requirements of the ACT inspection manual for light vehicles. It's performance and handling have not been degraded by the changes and the vhicl is considered safe for use on public raodways"

Hell's yeah, ironically, the only picture that turned out was the bill. See attached :Bang:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...