Jump to content
SAU Community

Recommended Posts

Hi all,

I have a custom stainless steel manifold for a rb20 or rb25. Its a low mount manifold and has a T3 flange on it for the standard or aftermarket turbo. It has a stud stuck in the turbo flange however can be removed easily by any mechanic. Selling because I'm going high mount.

Pics to come..

$400 ono

And GRAN TURISMO 4(Jap NTSC Version) In a box with all manual etc. Over 500 cars including some D1 cars :) Won't be released in Australia until late March. $80ono

Email [email protected]

Cheers !

Dan.

Link to comment
https://www.sau.com.au/forums/topic/61760-rb-2025-manifold-and-gran-turismo-4/
Share on other sites

  • 1 month later...

Hey,

Pics are being sent now...

The manifold is a low mount manifold and keeps your turbo in a factory location, therefore all the oil lines and water lines should connect up directly.

Was used for under 5,000k's as I need to go high mount now for more power. The condition is perfect apart from the stuck stud which happened on removal. This can be fixed by any mechanic for around $10bucks as they just have to cut it.

Will let it go today for $340 + postage...

Cheers.

Dan.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...