Jump to content
SAU Community

RB74 pads for R33 gtst

ImpulR33R
 Share

Recommended Posts

Downforce Grand Master

Downforce

Posted
Posted
Dont mean to hijack but does anyone know where in Melbourne I can get a set of these pads? Sorry back to the topic.

Nick, you can buy them from Race Brakes in Melbourne - www.racebrakes.com.au

:rofl:

GTRgeoff Grand Master

GTRgeoff

Posted
Posted
I can't speak for 662..... But the reason I took my RB74's out of my 200SX is coz they took forever to heat up and gave shitful pedal feel until they did.
I find this extraordinary. Personal preference is an amazing thing, but I asked racebrakes specifically for a pad that would give good cold properties, not bite hard at initial application (like most of the Bendix junk), be progressive with braking force the harder I pedal and be consistent and reliable on track. They delivered with a set of RB74's.

The only criticism I have is they go off in the last 4mm and are so hard that sometimes cold braking is a problem but until then (which included several track days) they were perfect.

Anyway if locosam falls through I'll take them no question for my wife's auto 33.

locosam Contributor

locosam

Posted
Posted

Hey I havent fallen through yet :D

Just waiting for impulr33r to contact me with details (unless he's already sold them to someone else?)

But thats ok, if the deal does fall through, ill probably buy a set new anyway :D

Impulr33r ive pm'd you, so just let me know how it goes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • BASHERnissan
      TPS voltage RB25DET

      By BASHERnissan · Posted

      Hi guys my TPS voltage is reading over 2v at idle.  My Haltech ECU is reading around 40% throttle position at idle also which is really strange. Note the actual throttle position sensor is brand new…    anyone have any experience with this or know how to calibrate it on Haltech ? 
    • joshuaho96
      Cas issue

      By joshuaho96 · Posted

      The OEM disk will not work on any AEM ECU, you need to use the one they made. You shouldn't have to flip the CAS or whatever you were describing, if you set the ignition sync offset correctly it can't backfire. Make sure you're using a spark plug lead on coil 1 instead of the timing loop to avoid weird issues with the timing light. Double check that your timing settings are actually correct, like is the 24 tooth configured correct or should it actually be 12 teeth for 1 crank revolution? I also found this: 305817248-AEM-Undocumented-Settings-v1-2.pdf    
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Yeah, I don't believe the M35 uses a deadhead system.
    • GTSBoy
      M35 Aftermarket Fuel Pump

      By GTSBoy · Posted

      Have you done your thinking backwards? 3 bar, 43.5 psi pressure drop being the presumed specification for an injector, means you need 3 bar upstream when they are firing into atmospheric pressure, and more upstream pressure than that when on boost (you add your boost to your rail pressure to maintain 3 bar across the injector) and you need..... less pressure upstream when you have vacuum in the manifold. So, presuming that you're idling at -10 psi, then you only need ~23 psi in the rail. I realise that I did not need to say all of that to you specifically Matt, once you'd realised your mistake. It's mostly there for complete clarity for others.
    • Dose Pipe Sutututu
      RB25 Drama's

      By Dose Pipe Sutututu · Posted

      Have you reached out to the guys at Spool Imports? They are a Ross dealer, I can imagine they would have the rings just sitting on the shelf (I could be wrong).  
×
×
  • Create New...