Jump to content
SAU Community

Vibration Noise at Low RPM

ECR033

By ECR033,
in General Maintenance

 Share

Recommended Posts

ECR033 Mentor

ECR033

Posted
Posted

On a recent trip from Sydney to Melbourne, I noticed a strange vibration sound coming from the engine bay in my car (R33 GTST). I only heard the sound when I was cruising at low RPM, slightly using the throttle in 5th gear and it dissapeared if I gave the throttle a squirt or if I down shifted into 4th gear. I do drive on freeways every now and then, but have only heard the same vibration sound two times before, whereas it's been fine otherwise. Being mechanically naive, I'm not sure what the problem could be...can anyone help me out???

Thanks in advance :D

Link to comment
https://www.sau.com.au/forums/topic/62098-vibration-noise-at-low-rpm/
Share on other sites
  • 3 months later...
benl1981 Grand Master

benl1981

Posted
Posted
On a recent trip from Sydney to Melbourne, I noticed a strange vibration sound coming from the engine bay in my car (R33 GTST). I only heard the sound when I was cruising at low RPM, slightly using the throttle in 5th gear and it dissapeared if I gave the throttle a squirt or if I down shifted into 4th gear. I do drive on freeways every now and then, but have only heard the same vibration sound two times before, whereas it's been fine otherwise. Being mechanically naive, I'm not sure what the problem could be...can anyone help me out???

Thanks in advance :D

Hi mate just been searching and found this. But I have it in most gears, especially 3rd 4tha nad 5th at low rpm and you hit the throttle. Did you solve your problem.

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...