Jump to content
SAU Community

Recommended Posts

Hey guys,

before you tell me to read the E-Manage thread in FI.. let me start by saying that I've read it and am familiar with what it can and what it cant do and I have decided if its suited or not to my particular application.. The info i'm chasing is.. who can tune it in Perth? And those in WA has had experience using E-Manage; who tuned it for you, how much did it cost?

kthxbai

:D

Link to comment
https://www.sau.com.au/forums/topic/62111-e-manage-issit/
Share on other sites

Fane - indeed.. coz im not aiming for huge power (260-270) for sure so im fairly certain that the E-Manage will have no problems getting me there.. yes i know piggybacks would probably get the same result (SAFC + ITC) but since the E-Manage has become cheaper and cheaper i feel its worth a second look :rofl:

Link to comment
https://www.sau.com.au/forums/topic/62111-e-manage-issit/#findComment-1172662
Share on other sites

if my memory is serving me well...... i think xspeed had a red s15 which used emanage and it was auto but had a few probs with it?

adrian :P

yeah Adrian the earlier versions had problems mostly with coilpacks but its been awhile and the latest version apparently deals with the problems in both Nissans and Evos

Link to comment
https://www.sau.com.au/forums/topic/62111-e-manage-issit/#findComment-1175892
Share on other sites

Not sure the latest firmware did fix the coilpack problem, as I've still heard of people having trouble. Just play it safe and put the zener diodes in like I did, I put some details in the e-manage thread.

That way you can also drop the trigger voltage down closer to the factory pulse voltage.

It's running fine with my auto transmission, never had any trouble with that aspect.

Link to comment
https://www.sau.com.au/forums/topic/62111-e-manage-issit/#findComment-1175943
Share on other sites

Michael - thats nice! what other mods do you have?

Thanx...current mods are Hybrid FMIC,Hi-flowed Turbo,E-manage,Z32 AFM,AVC-R boost controller,Walbro HF pump,JASMA 3.5" CAT back and dump,Apexi N1 adjustable coilovers, whiteline adj. sway bars front and rear and camber adj front,...sitting on the bench...800cc SARD inj, TD06-20G,custom manifold/plenum,dump pipe and fuel rail.

Cheers,

Michael

Link to comment
https://www.sau.com.au/forums/topic/62111-e-manage-issit/#findComment-1176934
Share on other sites

my bench is looking nice at the moment....but can we combine plz....i would like your sards and the custom mani and plenum and fuel rail :) hehe

 

nice figures dood....like i said before....interesting...emanage....

lol...thanx fane ;-) ...wouldnt leave me much on my bench dude, just a huffer that wont get the juice to go....i know where to come lookin'...i is local to you too...but yep often under-rated the E-manage but definitely good for people limited in choice having auto transmissions...but then again wont have my E-manage for much longer if plans work out....will stop whoring the thread now!

Cheers

Michael

Link to comment
https://www.sau.com.au/forums/topic/62111-e-manage-issit/#findComment-1177024
Share on other sites

if you are making large changes from the stock mappings it will affect your auto operation to some degree . it may be acceptable to you or it may not

i have had no issues with my auto operation in over 2 years at the above power levels, shifts have always been spot-on and tight, no flaring,nada.....maybe its coz i drive it like grand ma ;-)

rev-limiter wots that...babababa...ohh THAT!!

Cheers,

Michael

Link to comment
https://www.sau.com.au/forums/topic/62111-e-manage-issit/#findComment-1177064
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
    • He means "as opposed to mechanical cable drive". Older cars (R32 for ex.) had cable drive. Later cars with essentially the same gearbox, ie R34 GT (NA RB25) used essentially the same box as the R32 GTSt, but instead of a cable drive, had an electronic speed sender plugged into the same hole in the box, running from the same little gear that would have run the cable. Some of the shittier later cars use a speed sender on the nose of the diff, or the ABS sensors.
    • Lower than engine, or lower than it should at the hubs? Either way, that is a nice power figure and I'm not surprised you say it rips now. What stopped you from turning it up any more? Injectors? Or did it just stop responding to boost?
    • Got my 34 gtt tuned last week. Car made 362 wheel horsepower at 19 psi. Turbo was the ATR43SS. Only other upgrades were haltech 2000 series. 650cc injectors, walbro 250, fmic. Pro hub dyno reads 6% lower than actual figure according to my tuner. Car is a real ripper now.  IMG_7261.mov
    • Hi everyone, I'm wondering if anyone in Melbourne (preferably West) has a non-S2 R34 front bar. If it's already off the car, even better!  Nothing too weird, I just need to get a cut-out of the hole that the front indicators clip into 🤣 (image attached for reference)   I've got a front bar from JSAI Aero, but those holes need to be cut myself, and I want to get it right so the indicators will clip securely. And my OEM bumper is a S2, so I have no reference. So looking for a member who might be able to spare me a few minutes to make a cardboard cut-out using your front bar.
×
×
  • Create New...