Jump to content
SAU Community

Recommended Posts

then you can help me find this crazy clarks aussie BP pie yatala shop place thats so damn easy to find that no one wants to just post a map and stop the crap :jk:

As you can plainly see my MSPAINT SKILLS ROCK!!!

map.jpg

Follow my pink bits! :D

  • Replies 315
  • Created
  • Last Reply

Top Posters In This Topic

My prediction:

sau_png.jpg

(1) 8:45pm, SAU Gold Coast people running late come north up the M1

(2) 8:46pm, Everyone is in the right hand lane, so a mad dash accross 3 lanes to get to the correct exit in time. At this point several of the group will not be able to get accross and will continue north, probably ending up in Logan somewhere. When they hit the roundabout at the bottom of the off ramp, the majority of the group will take the wrong turn to the left. Several will make the wrong turn straight ahead to Yatala Pies, and although the odds are against it, someone may take the correct turn to the right. Doubtful.

(3) 8:52pm, Having realised they are going the wrong way, they will phone a Brisbane SAU member to find directions. The directions will start with "Do a u-turn", after this the Gold Coast members will tune out and do a right hand turn, followed by another right hand turn when the road runs out.

(4) 9:07pm, After negotiating most of the backstreets of Yatala, they will head south for a good 20 minutes or so before realising they have gone the wrong way. I am not sure what happens at this point, but somehow...

(5) 9:48pm, Gold Coast SAU members arrive on the river on a car ferry and are dropped off at distillery rd, as per the Brisbane SAU members instruction. Here they will follow distillery rd, until there is an option to turn. Which they will take.

(6) 10:15pm, Gold Coast people finally arrive and ring Brisbane SAU members to find out where everyone is. By now, Brisbane people are somewhere more than 4 turns away, so the Gold Coast members will call it a night

(7) 10:22pm, Everyone gets flashed by that goddamn speed camera that always sits just past that on ramp.

(8) 10:43pm, Gold Coast sau members whinge about being caught speeding on intarweb forums, followed by organistion of another cruise in 8 different threads for 4 different locations at 3 different times (and days).....

any gold coast people below labrador/southport/comera, arrr **** it- north gold coast- who dont know where to go, meet me at coomera bp ready to leave at 8, so 745!

it is so friggin ezy to get to this place that its not funny, man even i found it the 1st time, and thats coming from me:)

well thanks for the map Ska.

Now us useless Gold coast ppl understand that aussies actually refers to aussies tavern, which is 2 words for those brisbane ppl who feel the need to shorten everything, as their time is so important that giving the exact name of a meet location is beneath them and shame on any simpleton who has never been to the said location before, as they should know exactly where it is even though only half of the name and no street name are given. Perhaps even refidex page numbers and grid references could be provided for anyone that is pink colorblind.

btw i know where it is and was just taking the piss i do however believe that making other ppls lives easier tops up my good karma and stops me from being defected :headspin:

Dont think so afro, you coming on this cruise? i saw you the other day on corro drive at milton im pretty sure.

YA I'LL TRY TO COME,,

PROBABLY WASEN'T ME U SAW,, I'VE HEARD THERE IS ANOTHER BLUE R34 GTT FLOATING AROUND BRISY ,, GRRRRRRRR,,

SO IT COULD HAVE BEEN THAT ONE,,

It was a pretty good night except for us losing half the people coming out of the carpark. :)

There was nothing wrong with my intercooler supports. I think everyones car has been held together by cable ties at one stage or another.

Anytime steve. There's nothing quite like the challenge of driving through the boonies whilst trying to give someone directions on your mobile and also talking on the radio.

Was a good night except for heaps of people getting lost. :)

Anytime steve. What do you mean dodgy cable tie job? Eeryones car has been held together by cable ties at some stage or another and I've seen much worse than that in the past.

And nothing beats the challenge of driving through the boonies whilst trying to give someone directions on how to follow you whilst still listening to the radio.

Edit: something is buggered with the forums because The time I posted this was about 10am friday the 4th.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...