Jump to content
SAU Community

*** Tsunami Cruise for Charity. Combined Club Mega-Cruise ***


Recommended Posts

Yes this is still going ahead.

Why would it not.

I'll make sure that the Red Cross put this money towards the Tsunami Appeal as that was what we discussed with them.

THIS IS DEFINENTLY STILL GOING AHEAD.

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

SKY031

I have just spoken to our contact at the Red Cross and they have confirmed that the money will definenly go to the Tsunami appeal, it's just they have to start to raise money for their normal Australian charitys too.

MONEY is 100% GOING TO THE RED CROSS.

Hey ppls.

I've been off the air for a few days whilst changing to Telstra with our internet.

NEVER expect fast turn-arounds from telstra on ANYTHING!

All is well with the Meet up and all plans are in place.

Hopefully this weather will rain it'self out and we will have a great day.

BASS OUT

We should meet up a little earlier than 11:30 so that we can keep all our cars together.

Somebody might want to organise a cruise TO the Manhattan, but I wont be able to do it for obvious reasons.

So, who wants to organise a meet point, or should we just say, 11:15 at the Manhattan?

Somebody also needs to organise a cruise after to somewhere.....

R33Hesh.....

That's a lot of coke.

How does one precure such quantities of Coke??

Lions are going to do the BBQ which takes a lot of work off our hands!

Thanks Adz.

Last thing to find is some PA gear.

erm, lol either i buy em, or i got friend at "the coca cola compnay" i put my liner for pannel beating yday i tld thebugger i want it by 13th. and i better get it by the 13th!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...