Jump to content
SAU Community

Recommended Posts

Hey All,

I've just bought myself a gauge set and trying to figure out where to place them in my R33. Does anyone on the forums know the ins and outs of ADR's with respect to gauge fitment on your dash???

Any help or advice is much apprieciated :D

-Ant95gtr

Link to comment
https://www.sau.com.au/forums/topic/62680-advice-on-adr-compliance-gauges/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

pretty sure as long as they are below the top of the steering wheel they can be mounted anywhere on the dash so as not to restrict your view out the front or side windows.

Thanks Nark........I actually thought this rule read that you can't mount any gauge above where the dash meets the windscreen from the driver's point of view. I know a couple of people who got a bright yellow sticker for mounting it off of the A pillar right where it meets the dash - this would be under the top of the steering wheel but would 'restrict' view out of the bottom rhs of the windscreen......talk about :bs: design rules!

Adz - If you can track down that info it would be great. I have looked at the Vicroads website and the only gauges they provide info on are external ones (spot on Nark :D )

RTFGTR - I think that is the understanding of the rule that I tried to explain in my second post. From the drivers point of view (eyeline) nothing can obstruct the windscreen above the point that the dash *appears* to meet the windscreen.

Yeah it's strange, I can't find it anywhere. I know what it looked like, was a pic of a cluster and dash and had a circle round it showing where gauges can be mounted. You will have to call them I'd say.

I do remember it said you CAN NOT put them on the pillar, on the passengers side dash, ontop of the passenger dash. It said they were ok on the edge of the drivers side and also on the top of the steering wheel (which I think is silly, how do you see the gauges). The general rule is if you can hit it when you crash or if it's blocking your view = Bad.

Maybe even do a search on gauges?

yeah thats pretty much it... i know the singl cluster a pillar ones that were mounted low and in the corner were actually legal... i know where i had mine to the left of the original cluster was legal and was on the top of the dash in a way.

if ur going to get a few of em cut them into the dash itself

Wow thanks for that Adz....thats exactly the kinda info I'm after. I knew about the pillar thing as a mate has been done for it but hadn't heard about the passenger side dash rules etc etc. Makes sense though as in the majority of crashes the driver and passenger will hit the dash at some point so anything added in this area will present a higher risk.

I have done a search in the forums using gauges and other keywords but it seems no-one has 'official' info on where to locate gauges. I have also searched various vicroads websites to try an get this info and it seems the only way to get it is to actually buy the ADRs. I find it very frustrating that cops and vicroads are more than happy to defect us for modifications not complying with ADRs, yet when you try to find the info BEFORE you do the mod to try and ensure that it is legal, its impossible to find......

.....I guess the vic govt doesn't want to miss out on all that revenue huh :P

Yeah trouble is you can't fit 3 gauges where the a pillar meets the dash :P

the whole reason for this thread is 'cause I'm weighing up whether to fit them on the a-pillar /top of dash combo (and therefore for easy removal) or to cut them into the dash.

At this point, and with the lack of official info I'm leaning towards the dash option....the only thing I'm worried about is that I want to try and make it look as OEM as possible which means tracking down some higher quality single DIN fillers....any ideas on where I can find 'em??

yeah I'm kinda after a 'fill' plate. Basically I have an equalizer in one of my din slots that isn't being used.....I was thinking of ripping that out, replacing it with a fill plate as close to the face of the dash as possible, then cutting the gauges into that (and a bit of the dash surround around the din slots). To make it look as OEM as possible I was hoping to get either a CF or black plastic fill plate for a std din slot (i assume it would screw into the same screw holes that the radios use)

i love the look like the ones in my old ceffy were...

i'll be doing the same with my next car and cutting holes in the glovebox side of the dash and tilting them towards me....

Yeah Ni I didn't mind the look of those dash mounted gauges in the ol' girl......well except for the 'extra' air con vent :P

I considered that posi but with my eyes the way they are the closer to my driving position the better :P

hahahaha yeah Ni any ideas on where to find 21" gauges that I can read from the drivers side????

Unfortunately the aircon vent is similar to the centre dash ones.....squareish with one side sloping down.....Anyway I'm going to have a chat with a shop this week to try and get this sorted as not knowing the temp my oils getting to on track days is playing on my mind.....

If I get any ADR info while doing this I'll post for others...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...