Jump to content
SAU Community

Recommended Posts

Hey Guys

This is my first proper thread and i was wondering if you could help me out. My 95 GTST came with a wolf 3d v4 that was once hooked up but then taken out due to the coils breaking down. Im getting some new coils soon and just got some questions.

First question: Does the wolf retain its memory even after power has been disconnected?

If not leads me into my second question

Second question: I was wondering if anyone else has had a wolf 3D tuned in the Sydney area and are happy with the results and would recommend their tuner.

Thats all i can think of now. Appreciate anyones help :P

Link to comment
https://www.sau.com.au/forums/topic/62820-question-on-wolf-3d/
Share on other sites

The wolf certainly wont lose its memory. You have to make changes via the controller or laptop in order for this to happen and this wont happen by accident. Get some new coils, try to start it, dont boot it cause you dont know of the previous tune, whether it was done by a numbskull or someone as skillful as Matt Spry. So best take it for a dyno run to make sure A/F ratios are safe. Small bother, but could save you big dollars if there is something wrong. Contrary to many people's opinions, the Wold3dv4 is a very good unit and I run one in my car. Plus its affordable.

The wolf certainly wont lose its memory. You have to make changes via the controller or laptop in order for this to happen and this wont happen by accident. Get some new coils, try to start it, dont boot it cause you dont know of the previous tune, whether it was done by a numbskull or someone as skillful as Matt Spry. So best take it for a dyno run to make sure A/F ratios are safe. Small bother, but could save you big dollars if there is something wrong. Contrary to many people's opinions, the Wold3dv4 is a very good unit and I run one in my car. Plus its affordable.

Thanks for that. Will do. I ve had it sittin round for a while now and getting keen for it to get hooked up . Do you reckon i should just drive stock ecu to tuner and get them to put it on the dyno and get them to hook it up. Or is there a way to check the a/f ratios without putting it on the dyno :confused: . Take into consideration i know nothing about tuning etc. I mean will it come up on the hand controller. Where abouts is Matt Spry located. :rant:

Thanks for that. Will do.  I ve had it sittin round for a while now and getting keen for it to get hooked up . Do you reckon i should just drive stock ecu to tuner and get them to put it on the dyno and get them to hook it up. Or is there a way to check the a/f ratios without putting it on the dyno    :confused: . Take into consideration i know nothing about tuning etc. I mean will it come up on the hand controller. Where abouts is Matt Spry located.   :D

Matt Spry is located on the Gold Coast in Ernest. If you need his number, ask me and I can give it to you.

I would have your car towed to a reputable tuner as driving on the Wolf start map was impossible for me and who knows what damage you could do to your engine by running it on an unknown map. You can get cheap A/F ratio meters but they're not accurate. The wolf actualy has function for this now. So you can do it this way and this should be quite accurate. It should be good enough to get your car up and running if you know how to and are risking to tune it on the road (read dangerously stupid). Bite the bullet, take it to the dyno first up, save yourself a lot of hassle and trust me that you'll be one happy chappy when your car goes hard after the tune and you alive and have your licence.

Cheers

Thanks for the replys 180bfj20det. I probably should have mentioned that its is running the standard ecu atm so im just getting around on that. Matt Spry is located in Gold Coast. Thats a bit far for me im in newcastle but i will do some searches and try to find some good tuners in sydney (ones that other people would recommend). Not too keen for anyone in newcastle heard and read a few posts and most people say their pretty sh1t. Coils should be here in a couple of days finger crossed. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...