Jump to content
SAU Community

Recommended Posts

A DRIVER was trapped in the wreckage of his car for more than an hour today in Canberra as emergency crews cut the roof off the vehicle to free him.

The man, aged in his 20s, suffered a broken leg after his Nissan Skyline was wrapped around a light pole about 5am (AEDT).

A male passenger was treated at the scene for minor injuries before both men were taken to Canberra Hospital.

It took almost an hour to remove the driver from the vehicle because his legs were trapped, a spokesman for the ACT Emergency Services Authority said.

Advertisement:

A spokesman for the Australian Federal Police's ACT division said the accident was under investigation and the driver would be tested for alcohol levels when his condition permitted.

No other vehicle was involved in the accident.

Hope it wasnt anyone here!

Link to comment
https://www.sau.com.au/forums/topic/62821-uh-ohs/
Share on other sites

I'm suprised that the media bandwagon hasn't jumped right back onto the whole "killer Skyline" thing or the "reckless P plater" thing to bring us more coverage of the crash...It seems that everyone knows everyone,or someone who does,in Canberra-it's a suprise that we haven't found out which car/driver it was.Whilst I wouldn't wish ill of anyone injured in any car crash,if the small bit of media we've heard holds any truth about the alcohol level of the driver,well...

Link to comment
https://www.sau.com.au/forums/topic/62821-uh-ohs/#findComment-1184484
Share on other sites

page seven of the canberra times...

it's a two tone series I 33, gold(ish) wheels from what i saw in the photo. wasn't YGT25T was it? said the driver was a 25yr old from dunlop, cause of the crash was alcohol and speed, going too quickly around a corner.

the car wrapped itself on a wooden electrical pole on the center pillar driver's side, firies cut off the roof of the car

Link to comment
https://www.sau.com.au/forums/topic/62821-uh-ohs/#findComment-1184641
Share on other sites

saw the pic: i think its pretty much silver, not a whole done to it from the looks, body is stock and nothing really special, although it now has a side-mount telegraph pole.

i hav'nt seen it before and i think i can safely say its none of us.

Link to comment
https://www.sau.com.au/forums/topic/62821-uh-ohs/#findComment-1184887
Share on other sites

I'm suprised that the media bandwagon hasn't jumped right back onto the whole "killer Skyline" thing or the "reckless P plater" thing to bring us more coverage of the crash

thats exactly what i thought, infact i was thinking id hear it on the news or see it in the paper under very similar headlines but nothing as yet.

Link to comment
https://www.sau.com.au/forums/topic/62821-uh-ohs/#findComment-1185090
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...