Jump to content
SAU Community

Automatic Transmission Shift Kit. - Updated Oct 2006


Recommended Posts

That sounds about right to me.

I now have a fully rebuilt transmission in mine.

how does it drive now?

did u get it rebuilt by MV Automatics?

exactly what is involved with a full rebuild?

and, by any chance did anyone replace their standard trans oil cooler?

if so, im in need to replace my standard trans oil cooler. just PM me thanks!

Drives very nice. Stock like when driven sedately. Harsh when driven hard. It is different though. Say you accelerate in 2nd to redline then let the throttle off but stay in 2nd. You don't get engine braking. The rpm just drops down to about 3k.

New bands, uprated servos, carbon kevlar bits apparently.

MV built it.

MV is in sa, i would assume that the r34 price is same as the group buy price. Mike gave me the group buy price for my z32. For those doing the vb them selves dont do the silly thing i did and leave out the selector ;). Many thanks to abo bob for helping me with this prob over msn ;).

Shift kit is awesome, i have tried out many things with my car running manual ecus, hks auto line controllers and nothing comes close. While they did a good job shifting firmly they did not respond fast enough, ie. i would always bounce off the limiter when manualy selecting from first to second. Now with the stage 2 shift kit it not only shifts even harder but is much more responsive, i can easily shift the gears manually with just a bit of a delay from when i move the gear stick. Like to thank 4door_Sleeper for organising and mv auto.

  • 2 weeks later...

I rang mike on Tuesday and ordered one, and he called back Wednesday to let me know it was shipping out ! Really nice bloke, easy to talk to. Will report back next week once i fit it..

Gary

hi guys...

its good to see so much interest in our shift kits...

i hope they are all going well

for you who dont know i work their with mike i have been their for just over 2 years now..

we do these kits all the time and highly recomend them.

i have one in my r33...

from gary

Changes are smooth when light throttle 3-3500 rpm other a bit of a bump but at heavy throttle and highers revs it's back to pretty smooth.

The thing now changes faster than the computer is expecting so the revs drop a bit much sometimes.

Changes are smooth when light throttle 3-3500 rpm other a bit of a bump but at heavy throttle and highers revs it's back to pretty smooth.

The thing now changes faster than the computer is expecting so the revs drop a bit much sometimes.

the revs drop a bit much??

hmm it sounds like the 34 gearboxes dnt like the shift kit as much asthe 33??

abo bob do you think it is worth getting the kit?? seeing as you blew your box when you put it in i am a bit worried?

has any one else on here put it in a r34 tiptronic or just abo bob

Yeah that probably helped it. lol

so you are happy with the whole package?? i drive a large distance to work and need it to still be smooth when being driven normally.

you said something about it dropping revs too much?? are you using standard ecu?

sorry to ask so many questions but seeing as you have already done it i may as well ask.

yeah I'm in the same boat as mad34, but I am also going to get the high-stall modified while Mike is in the box. Are there any known negative side effects on life of the box or components etc? Later on I am going to get kevlar disks etc put in to fully strengthen the whole box.

yeah I'm in the same boat as mad34, but I am also going to get the high-stall modified while Mike is in the box. Are there any known negative side effects on life of the box or components etc? Later on I am going to get kevlar disks etc put in to fully strengthen the whole box.

Hi Andrew

Quicker shifts prolong the life of the clutch packs as they spend less time grinding away on each other. They also reduce the heat generated which is the big killer of autos. Make sure you also get a trans cooler fitted.

If there is enough interest we may be able to set up a group buy on the modified torque converters. (I am happy to talk to mike about this if there is enough interest - and as I need to do it to my 33 soom anyway.)

the 34 has a trans cooler fitted stock - I assumed all Skylines do!

I am looking to upgrade the cooler to a larger and more efficient one shortly anyhow.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
    • okay, so I figured this out, removed needles and reinstalled after swapping the gauge face on my triple gauge for my ER34, all work and look good. I tried to do the same for the main cluster, but the main cluster gauge faces are dished, the replacement gauge face are flat, so due to the dish in the org face ,mounting backing plate (clear) and depth of the needle, the flat gauge face will not work. I notice that R34 gtr gauges are flat, appears to be different clear backing plate that aren't dished. are these available, or what have others done to install flat gauge faces?
×
×
  • Create New...