Jump to content
SAU Community

Recommended Posts

ok this is the problem

the passenger door wont lock. i use the central locking the latch moves on the inside of the door so it looks like it has locked but you can still open the door. tried locking the inside by hand and closing door but you can till open it from outside as if it wasnt locked.

also tried closing the door and locking it from the outside with the key, it feel like it has turned far enough to lock the doot but it wont lock.

removed the trim from the door and played with the lock mecahanism, everything seems to be moving like it should but it just wont lock

any ideas what is casuing this and how i should go about fixing it?

thinking of taking the mechanisim out of the door to check in out and try and clean it but they way the rods are connected to it will make this a problem.

btw this is on a 32 gts-t

any advice would be much appreciated

Link to comment
https://www.sau.com.au/forums/topic/63030-passenger-door-lock/
Share on other sites

took the whole mechanisim out today and it all seem to be in order with no obvious faults. its a sealed unit so i cannot really open it up with any hope of puting it back together in working order. think my best option is try and source a repalcement from somewhere

I had a similar problem with the passenger door lock on my R32 GTR. The mechanism looked normal, but close inspection showed that it had 'split apart' a few mm near where the lock rods attached. This had allowed some of the internal mechanism to come adrift and of course it didn't work properly.

New mechanisms are still available through Nissan, but have to be ordered from Japan (2 week wait) and are $200+. I ended up sourcing a good secondhand one from an SAU member.

LINXUS40 i have exactly the same problem, it closes all but 2mm from locking on my 32 gts-t...... i took mine apart also and there is nothing obvious, i changed nothing then put it back together and it worked for about 24hrs before it shit itslef again.......

dont know what to do bout it???

Yep, same here. I've had it for about a year. The solenoid closes down, but not enough to completely lock the door - normal wear and tear I was told. The only solution I've been told is to replace the unit and, you don't have to use the OEM item. As long as the solenoid works on the same electrical configuration she'll be sweet.

My Passenger lock has been doing strange things lately....When i turn off the engine, Both doors should unlock right?.......LAtely its been very fussy somes times it does, but most times it doesn't...otherwise it works 100% OK, the button in the arm rest works, as well as the alarm/mobiliser remote......it seems very strange?? :confused:

  • 5 years later...

Hope no one minds me dragging up an old thread...

My R32GTR drivers door started exhibiting the same symptoms as your passenger door linxus40, so I pulled off the door trim for a look. Initially there was no obvious cause, so I removed the latch assembly and discovered that one of the black plastic clips that hold the white plastic cover in place was broken and the cover had partially separated from the body of the latch. On closer inspection this clip appeared to be a pivot point for part of the mechanism, and this was mis-aligned which was the root cause of the problem.

Now my question is what is availability like and how much should I be paying for a replacement latch, found one (used) on ebay (in Australia) for $39 plus postage, which seems pretty reasonable, but as we all know used parts are a lucky dip, might last 10 minutes or 10 years.

Also I am wondering if this is a common problem, anyone else had this?

Edited by DAT510

I have the same problem. If anyone finds a solution or needs some teamwork just say so. Can't get to the lock properly, called up automotive locksmith but never got to the point where I got it inspected. They said it could possibly be the central locking system.

Edited by TyresBro

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...