Jump to content
SAU Community

Recommended Posts

1995 R33 Gts-t (series 1.5)

White

5 speed

110,xxx k's (rebuilt recently with stock internals)

had full service all belts done, water pump replaced etc..

Sunroof

Currently putting out 381rwhp on 14psi and 6800rpm running 10:1afr's on millenium motorsports dyno.... reads lower then dyno dynamics dyno's.

Made 680Nm of torque also :D:

Engine

HKS Gt3037s 56T turbo

HKS ss manifold

HKS 56mm external wastegate

Tomei cams

Tomei cam timing gears

Splitfire coil packs

Greddy plenum

Q45 infinity throttle body

Nismo 740cc injectors

HKS airpod

600x300x100 intercooler

Cusco oil catch can

100mm piping into turbo and i/c

Apexi N1 exhaust

Trust clear cam timing cover

Electronics

Greddy boost guage

Greddy exhaust temp guage

Greddy profec boost controller

Greddy turbo timer

Autometer sport comp monster tacho

HKS F-Con V piggyback computer

Techtom IIC-460 ignition controller

Driveline

Freshly rebuilt gearbox (reciepts for full rebuild and parts)

HKS triple plate clutch converted to twin plate carbon (very streetable)

Locking LSD

17x8 17x9" 5 spoke white rims with near new falken fk451 235&265's

Handling/Braking

Potenza coil-overs

Swaybars

Slotted front rotors

Sport pads front and rear

Body

New front bar probably trust or GTR copy

Side skirts

Trust rear wing

400r Grille

Interior

Recaro drivers seat

Sabelt harnesses

Veilside shift knob

Tinted rear windscreen and rear quarter windows

Sell with RWC and has 4 months rego atm

Easily capable of more power with boost wound up as turbo efficiency range is 1.2-1.5bar from what i've read/heard.

Very quick car.

$22,000, not really interested in trade unless it's for a decent car.... not a shitter and not another skyline.

Link to comment
https://www.sau.com.au/forums/topic/63633-380rwhp-95-series-15-gts-t-22000/
Share on other sites

ummm tune is rich but afr's drop pretty smoothly to 10:1 as hits full boost and sit pretty flat..... surprisingly good tune even though richish one. I was down in bris and goldy two weekends ago but don't go down there much :D Went to mercury motorsports thing... woulda put it on the dyno but 50bucks is a lot for a dyno run :)

Pics sent to all

knore -> the piggyback computer uses a maf or map sensor as far as i know in place of the less accurate and more restrictive afm. Not sure what type exactly however.

Jamie

knore-> dont know how the safc2 will go as it has a lot less point on the map to adjust whereas the piggyback i have has quite a lot of adjustment points.

rb20zed-> i tried to email you but i kept getting messages back saying the mail was undeliverable. do you have another email address you can pm me? Yeah as long as i recieved funds before the car left and you paid for the transport i would be ok with sending it to wa.

Jamie

hey mate are there any major scratches or anythin wrong with the car at all cant tell by those pics as they are very blurry if you wouldnt mind taking some better ones of both sides of the car and the full front that would be great. are they bugs on the front of the car?

otherwise looks good

Yeah they are bugs.... haven't washed the car for probably 3 months(i'm not kidding)..... i'll take some pics tomorrow.

Nothing wrong with the car besides the current front bar being "customised" but i'll replace it if sell for the asking price otherwise i can take the cost of new one and paint($600) off the asking price.

is there any stereo or anythin in the car, stains, lifting dash ect lol as i cant see it in reali life its things i would look for :> seeing as i would have to get the car reregistered over here would you be interested in handing in the plates on purchase and taking the money you got back off the car?

no stereo.... no stains no lifting on the trim etc interior is like new except glove box is removed(still have it) and metal plate where stereo and that is so switches and rev limiter are mounted on it. No wear on steering wheel or gear boot and seats. I would deregister car if you wanted but probly wouldn't get much back as in qld think they round it off a lot.

ah fair nuff will you put all the glove box together ect for the sale and is there any interior trim missing. also is the original seat thrown in with the car aswell? also anythin such as the air con missing or anythin like that??? (sorry for the many questions as im over in perth its very hard to inspect a car over there :>)

no sorry i don't know how to put the glove box back in but it will go with the car as will the three near new hks clutch plates i removed to change for the two carbon ones 3 months ago and straight through cat replacement pipe. The original seat doesn't come with the car. I do not have it. Everything is intact still has aircon which works, power steering, abs everything.... it's not a stripped out drag only car more of street drag car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...