Jump to content
SAU Community

Estimated quarter?

r33GTS-t-200kw

By r33GTS-t-200kw,
in Engines & Forced Induction

 Share

Recommended Posts

r33GTS-t-200kw Enthusiast

r33GTS-t-200kw

Posted
Posted

Hi all

Just picked up a nice r33 GTS-t with a few mods. It has around 207rwkw with 2554017's on the rear. What do you guys think she can do the quarter in with those specs as I havnt had a chance to race it at the strip. I just need to know what others are getting and what rwkw they have. The dyno was a DD dyno in shoot out mode. I know rwkw vary from dyno to dyno but a ball park figure would be sweet.

This is what it feels like driving the skyline compared to my V8 :kick: and the V8 was running high 15's (302)

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/63719-estimated-quarter/
Share on other sites
doridori32 Rising Star

doridori32

Posted
Posted
Hi all

Just picked up a nice r33 GTS-t with a few mods.  It has around 207rwkw with 2554017's on the rear.  What do you guys think she can do the quarter in with those specs as I havnt had a chance to race it at the strip.  I just need to know what others are getting and what rwkw they have.  The dyno was a DD dyno in shoot out mode.  I know rwkw vary from dyno to dyno but a ball park figure would be sweet.

This is what it feels like driving the skyline compared to my V8  :kick:  and the V8 was running high 15's (302)

Thanks in advance

mid 13's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...