Jump to content
SAU Community

Recommended Posts

hey i have a RB20DET with a 3.5inch exhaust turbo back, hks front mount, high flow turbo, 1 bar boost, pod with heat sheild...and standard fuel system...wat i want to know is how much mroe power would i get by getting GTR injectors a bosch fuel pump a sard regulator and a ecu tune.....i want to run the same amount of boost aswell..would i be getting any decent power gains from this?? i would also add adjuctable cam gears into this aswell....it currently should have around 160rwkw's or sumthing im not sure...

Link to comment
https://www.sau.com.au/forums/topic/64061-rb20-fuel-system/
Share on other sites

chances are you are running lean at the moment. there is no need for a set of gtr injectors till you are running 190 rwkw. but at 160rwkw your standard fuel pump is struggling and should be replaced.

if you are not going to run anymore boost than what you are already running then you will get little or no performance gain from injectors.

but you should get a fuel pump for safety.

Link to comment
https://www.sau.com.au/forums/topic/64061-rb20-fuel-system/#findComment-1202746
Share on other sites

I have the same mods (NO FMIC though) and my car makes 165rwkw @ 0.7Bar.

Yet i have a fuel pump and also a chipped ECU.

My suggestion would be to get the fuel pump also as they help more than most think.

I'd say you'd be looking at 180 -190 rwkw with a tune and pump. My chip gave me 11rwkw!!!

Link to comment
https://www.sau.com.au/forums/topic/64061-rb20-fuel-system/#findComment-1202914
Share on other sites

how much power can u get from a high flowed turbo on an Rb20 then?? i wanna get to around 240rwkw....what would i have to do to get me there without replacing the turbo again... i thought if you got adjuctable cam gears and a fuel system upgrade you can reach this goal pretty easy

Link to comment
https://www.sau.com.au/forums/topic/64061-rb20-fuel-system/#findComment-1203373
Share on other sites

I have a GTR fuel pump in an R32 GTST, it sorta bolts straight in. It is bigger in diameter so you have to modify the rubber bottom mount, plus I fitted a stainless screw clamp around it and the bracket just to be sure. :rofl:

Link to comment
https://www.sau.com.au/forums/topic/64061-rb20-fuel-system/#findComment-1216104
Share on other sites

Cheers for that SK! Sound easier than fitting an aftermarket job.

I assume the 32 & 33 GTR pumps would externally identical. For $100-$150 would it be a worth while upgrade for someone chasing less than 180rwkw?

Link to comment
https://www.sau.com.au/forums/topic/64061-rb20-fuel-system/#findComment-1216128
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you are Ecutek tuned then these TCU tunes are anywhere from $550 to $700 usd. If you are not ECUTEK tuned, then it gets costly!    
    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
×
×
  • Create New...