Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

I am just wondering if anyone else besides “japp_imports“, would mistake a standard R33 dump pipe for an exhaust header? Roughly 3 weeks ago now I created this thread specifying that I am after a “Standard Exhaust Header” to suit an R33 Skyline, more specifically an RB25DET.

Now just moments after this thread was posted the user that goes by the name “japp_imports” sent me a PM telling me he had a Standard Exhaust Header for sale. He then said that this part would cost me $50 + $20 for shipping OVER NIGHT. This sounded like a good deal to me so I went ahead and wired the money. This took place Monday, japp_imports confirmed that the payment was received and informed me that the part would be shipped out Tuesday morning and since I paid him for overnight shipment it should have arrived Wednesday. To cut a long and painful story short the part did not arrive until Tuesday (next week) and even then I had to go and fetch it from TNT.

When picking up the “Standard Exhaust Header” I noticed the packaged was about three times to small. Believe it or not the guy that calls himself “japp_imports” sent me the Standard R33 Dump Pipe. Okay so I have waited over a week for the wrong part and have had no car in this time. I was not about to get pissed off with japp_imports over this, despite it being his fault. Therefore I rang him and explained that he sent the wrong part.

Again cutting another long and painful story short Mr. “japp_imports” argued that what he had sent was the “Standard Exhaust Header”. I corrected him and explained that this was in fact a Dump Pipe and cannot be mistaken as a Header. He then tried to tell me this mistake was my fault. This didn’t go down well and I asked that he return my $70 in full and I would return the Dump Pipe. This would of course put me out of pocket as I would get my $70 back, but would have to then pay to ship the dump back.

Typically, japp_imports decided to screw me around some more and requested that I send the dump back and he will send just $50 of my money back. I don’t know how this scenario came about but its bull shit. Lets be honest $70 is nothing, well its $70 really. But that’s not the point, this guy fu$#*ed me around for over a week and now he wont give me my money back despite being such an insignificant amount.

Anyway, I just want to know what someone else thinks ... is an Exhaust Header a Dump Pipe?

They are the same thing yeah? Header, Manifold, Extractor? I believed “Manifold” to be more of a generalization such as Throttle Body Manifold and so on. Question was however can an Exhaust Header be confused with a Dump Pipe?

There is no such thing as a throttle body manifold (I think you mean the intake manifold).

I guess it could have been a misunderstanding, if it was me however i would have understood it to be the exhaust manifold

Yeah sorry that’s what I meant, anyway point is I was sent the wrong thing and that’s not really a big deal. However, the guy that sent the wrong thing and made the mistake is unwilling to take it back!

I reckon just cut your losses and just get $50. i think it was just a misunderstanding (you weren't clear enough maybe) maybe just tell him to pay half the postage or something. good luck

Yahoo seems to know what a header is ... just spoke to a guy in the know and he says the real name is HEADER, exhaust manifold is another word to describe it. However, Header is used to distinguish it from an inlet manifold!

http://images.search.yahoo.com/search/imag...mg-t&fl=0&x=wrt

I understand what you are talking about, and I'm just a mechanic (oh and a mechanical engineer) so maybe he's a bit of a dunce. There is no way to confuse header with dump.

Anyway, I have a standard manifold as I just did a twin turbo upgrade with Snowies GTR34 turbs so feel free to make me an offer, and you are welcome to come to pick up.

For now I have notified the admins.

japp_imports seems to be logging onto the forums, he just wont reply to my PM messages.

MSPEC

Your a real drama queen! I described the part to you and clearly asked you if you wanted it with or without the OXYGEN SENSOR. I sent you what I described to you over the phone. Regarding the delay in shipment put your complaint in writing and forward it to TNT!

I have offered you a refund for the $50 I charged you for the part and the offer still stands. The $50 will be deposited to your account the second the part is received. Please understand I CANNOT refund you $20 for shipping as the $20 went to TNT not my pocket.

Also add EXHAUST MANIFOLD to your vocabulary!

Caution! to all out there on SAU if trading with this person ask him for a picture to confirm what he is after as he clearly has no idea!

If I am a drama queen you are an out right liar and on top of that you’re not the brightest. “I sent you what I described to you over the phone”, I only rang you once I found out that you sent the wrong part. Don’t give me that “OXYGEN SENSOR” bull shit again, I asked for the Header, you send the Dump Pipe, that’s just stupid. I should get the $70 back in full and I will send the dump pipe back. Either way I will be the one out of pocket and furthermore had no car for 2 weeks.

I will add EXHAUST MANIFOLD to my vocabulary, if you work out the different between a DUMP PIPE and an EXHAUST MANIFOLD for me :) LOL

Okay “japp_imports” just rang me tonight at midnight to threaten me I believe. He tells me that if I do not let everyone know that this problem has been resolved he will fly down to Melbourne and pay me a little visit. I tried to tell him that he owes me $70 and I owe him a standard dump pipe but he wouldn’t listen. Then he tells me that he will refund just $50. I said okay give me $50 back; he then says I have to ship the dump pipe back to him which will cost $20. Therefore I am only getting $30 back, he then says $50 is nothing to him and it’s just the principal of the thing.

I tell him the problem is not resolved and then he threatens again that he will come and visit me, I was not phased by this. He then says what he sent me is a header and not a dump pipe. He says the mistake was a 50/50 thing, nothing he said made much sense. The problem is NOT resolved and now it looks like I will have to involve the Police.

I told “japp_imports” that it makes the most sense to reverse the transaction, is this not unreasonable. I asked for a header, I got a dump pipe, I paid $50 for the dump plus $20 for shipping, all of which was wired to japp_imports account. Now I want my $70 back and I will spend $20 of it getting the dump back to japp_imports which will leave me $20 out of pocket.

This is a joke and “japp_imports” is positive that a dump pipe is a header. I told him not even Yahoo is that stupid and he said he didn’t care. I also told him we could do a poll in the forums asking if a dump is a header and he said he didn’t care. Bottom line is he knows he is wrong and how he is trying to scare me to resolve the issue in a way that will suit him. If you want “japp_imports” fly down and we can have a chat, I can even book you in at the local Police station.

I have offered you over and over a full refund for the purchase price ($50) of the part on its return! Also the standard exhaust manifold has been packed ready for shipping for the past week since you called me saying you have recieved the wrong part. I am not a shop and cannot afford to pay for your frieght costs!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...