Jump to content
SAU Community

Recommended Posts

screw riding a bike to work, my next door neighbour had to all winter cos he crashed his car....

oh and the weather ain't all that bad here, i got on a plane here and off in brisbane and there was no difference...

actually the whole drive down to melb i think it was colder than tassie

Haha, difference was timmy, you probably left here in the middle of the arvo with the sun out, and arrived in bris with the sun down and a shit day. But there has hardly been a winter at all this year. every year it seems to be getting closer to being just one 12 month season.

screw riding a bike to work, my next door neighbour had to all winter cos he crashed his car....

oh and the weather ain't all that bad here, i got on a plane here and off in brisbane and there was no difference...

actually the whole drive down to melb i think it was colder than tassie

You BIG girl Tim.

Nothing wrong with riding bikes, there just like cars and can be used in all weather conditions.

Its the rider that can't :rolleyes:

I ride mine and the car is on the road (well most of the time) its easier and quicker to get to work, (and i can have more fun as well) less fuel consumption and i can park anywhere....

I love Tassie weather B)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...