Jump to content
SAU Community

Is it safe to drive your car with out the mud guards underneath the engine bay?

Amadeo

By Amadeo,
in General Automotive Discussion

 Share

Recommended Posts

ecl Mentor

ecl

Posted
Posted
Well i lost the entire piece whilst driving so i have nothing protecting the engine bay from mud or water.

Should i find a replacement or would it be fine?

i dunno

i took off the bottom piece for the oil change

took off the ones in the guard due to scrubbing

might put them back on later after i bang in the grooves with a hammer

Slide Grand Master

Slide

Posted
Posted

most people that install aftermarket fron bars do not have them on

i dont havnt for a month or so also drove through flooded road in order to get home and it went fine.

silver gts-t Grand Master

silver gts-t

Posted
Posted
If you mean the intercooler guard... Mine fell apart and started scraping on the road... So i took it off and no problem so far. (2 months though)

LOL

Same as mine i fut the GTR bar on and they were to short so they would scrap the road, they got reduced further in size after the road gave them a sand job but a couple cable ties fixed that!!! :)

Amadeo Community Regular

Amadeo

Posted
  • Author
Posted

LOL, love the stories. Mine fell off because i drove around with no front bar for 2 days as it was getting a respray. Whilst driving on the freeway i begain to hear some scraping noise but i ignored it for a while and then i heard some thing clatter near my guards and before i knew it i heard a loud bang and i looked in my rear view and saw the whole thing fly off. I wanted to go back and retrieve it but there was a highway patrol coming in the opposite direction and so to avoid any confrontations' i decided to let it go (code red). Not happy but since you guys seem to be going fine i guess I'll join the club! : )

krzysiu Grand Master

krzysiu

Posted
Posted

I need one of them for my r33, the only problem of not having one is that your engine bay gets really really really really dirty.

EDIT: which flaps are we torking about, the one that behind the bumper? or the one that is under the engine?

IanH Collaborator

IanH

Posted
Posted

I fiited an aftermarket frontbar and soon after I lost all three trays (under engine and both wheel arch ones) at a circuit with a Porsche Carrera 4 inches behind me. Huge bang (thought he'd hit me) followed by lots of light flashing :D

Ronin 09 Grand Master

Ronin 09

Posted
Posted
Ronin you're going alittle overboard however I did swap my std nissan tray for a nismo 1 and picked up around 6rwkw... true story

ok ok, it didn't fall out.

it's lucky i had the intake plenum zip tied to the nismo strut brace; it held the motor nicely :(

CWest Collaborator

CWest

Posted
Posted
w00t, I have cableties holding the corners of my front bar off the road. Best. Invention. Ever.

Hey thats what ive done until i go and get them replaced. It looks funny though, bits of string holding the tray from scraping on the road.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      I refer you to this thread on PF, by someone who knows what he's doing. Paints a good picture of the humble AD09.
    • Duncan
      Lock up the old for sale / wtb threads.

      By Duncan · Posted

      Ha, I've never pressed the X in all these years incase it removed the notification for all Admins
    • Duncan
      Blue/grey smoke after idle

      By Duncan · Posted

      I don't know, I've never done it that way, but 1. While it is an interference engine, there is still clearance between the valves and the piston at all points in the regular timing cycle 2. There is not a lot of distance before you can't catch the top of the valve stem any more I don't know if 2 is greater or less than 1. But 3. If it doesn't work out you are f**ked, engine is coming out to disassemble so it is a big bet.
    • Duncan
      Unpeeling the Orange

      By Duncan · Posted

      Semi slicks are horrible for road use, just use a high performance road tyre unless you really need the maximum grip. Noisy, unpredictable (amazing, until they are not), expensive due to very high wear and not good in cold and particular wet. And yes, it is a thing to store cars on stands instead of tyres if you know they are going to be parked up long term.....but who ever realises that a short park is going to stretch into years before it is out again!
    • MBS206
      Unpeeling the Orange

      By MBS206 · Posted

      I know in Australia you'll definitely get above 30c. Parked in the shade in Summer you'll be above that. 😛 But in cooler climates, you might get that warm driving on the highway for a bit, but you'd never get to full heat temp. I'll try and find some of my historical tyre temps between Aus summer and winter (be aware immin the warmer area of Aus too.)
×
×
  • Create New...