Jump to content
SAU Community

Recommended Posts

i have them, there is a review on here somewhere, do a search for it.

i've done 3 track days and nearly 15,000ks on them and they are still fine, maybe 50% tread.. hard to tell... road noise is fine. Good road tyre. i have 255/35/18's

Link to comment
https://www.sau.com.au/forums/topic/65627-hankook-k104s/#findComment-1226043
Share on other sites

I run 235/40/18 fronts and 265/35/18 rears. Currently have about 15-18,000kms on them and they seem to be holding up fine, heaps of tread left. No track time on them yet but for the money they are pretty good. No louder than any other street tyre I've used in the past.

Z.

Link to comment
https://www.sau.com.au/forums/topic/65627-hankook-k104s/#findComment-1233035
Share on other sites

  • 6 months later...

Just bought four 235/45 17" Hankook K104s, since everyone is raving on about this particular tyre.

I havn't yet tested them in wet conditions but they seem like a very comfortable drive, and arn't noisy.

Got them from Jax, rang a few different stores and they all varied in prices! some had the tyres for $30 more!.. Got them for $169 each after some negotiations biggrin.gif also did my wheel alightment front and rears.

Seems like a good tyre so far.. they are rated Y grade and have silica compound too!

Link to comment
https://www.sau.com.au/forums/topic/65627-hankook-k104s/#findComment-1595506
Share on other sites

I run 235/40/18 fronts and 265/35/18 rears. Currently have about 15-18,000kms on them and they seem to be holding up fine, heaps of tread left. No track time on them yet but for the money they are pretty good. No louder than any other street tyre I've used in the past.

Z.

What did the 265/35R18's cost per tyre if you dont mind?

Link to comment
https://www.sau.com.au/forums/topic/65627-hankook-k104s/#findComment-1595692
Share on other sites

  • 2 weeks later...

When i bought my hankook ventus k104s the guy at the shop said hankook had been doing a lot of work to improve their sidewalls.

Mine have lasted 20000 kms very well so far, and ive hit many a pot hole.

Link to comment
https://www.sau.com.au/forums/topic/65627-hankook-k104s/#findComment-1615400
Share on other sites

ive heard tyre places that sell Khumo's say they are crap! but ive driven on the ecsta supra's and the k104's, and i have to say that for the price of these tryes, both brands perform extremely well, and by no means are you going to jump up and say "these are cheap tyres!" if someone handed you the keys to the car without telling you what tyres are on the car.

Link to comment
https://www.sau.com.au/forums/topic/65627-hankook-k104s/#findComment-1631432
Share on other sites

Hi Guys,

I have heard great reviews on this tyre and thinking of getting this sometime this week.

I do have a few questions tho. Sorry to steal the thread!

I have 18x8.5 for fronts, 18x10 for rears. For rears, i was thinking of getting 265/35/18. But for the fronts should i get the same sidewall size ie should i get xxx/35/18.

Would having a different sidewall at the front and back, ie, fronts being 40 and rear being 35, make a big difference esp to the tacho, mileage and handling?

The two sizes in 35s i was looking at were, 225 and 245. And in 40, there is 235/40/18.

What would you guys recommend? Would it make a big difference in terms of steering between 225 and 245?

Thanks heaps in advance guys,

:)

Link to comment
https://www.sau.com.au/forums/topic/65627-hankook-k104s/#findComment-1633590
Share on other sites

  • 2 weeks later...
Hi Guys,

I have heard great reviews on this tyre and thinking of getting this sometime this week.

I do have a few questions tho.  Sorry to steal the thread!

I have 18x8.5 for fronts, 18x10 for rears.  For rears, i was thinking of getting 265/35/18.  But for the fronts should i get the same sidewall size ie should i get xxx/35/18.

Would having a different sidewall at the front and back, ie, fronts being 40 and rear being 35, make a big difference esp to the tacho, mileage and handling?

The two sizes in 35s i was looking at were, 225 and 245.  And in 40, there is 235/40/18.

What would you guys recommend? Would it make a big difference in terms of steering between 225 and 245?

Thanks heaps in advance guys,

;)

I recommend 235/40/18 on the front and 265/35/18 this makes the overall diameter of the wheels the same therefore your speedo will remain unchanged and your steering is not too heavy. It is the perfect tyre setup for a skyline.

Link to comment
https://www.sau.com.au/forums/topic/65627-hankook-k104s/#findComment-1664611
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...