Jump to content
SAU Community

Recommended Posts

Okay, look at the picture below and help me out. What is missing in place of the empty spots on my engine. If it is missing, what else should be installed to do the job this item did ? Is it serious ?

Skyzer had a hunch it was something to control the sparks. Some of you may have read another one of my threads about a bubbling noise when on boost, some said this was misfiring, now I'm no expert but misfiring is related to SPARKS...

missing1.jpg

Any help would be appreciated.

Link to comment
https://www.sau.com.au/forums/topic/6568-pics-whats-missing-in-my-engine-bay/
Share on other sites

Mine is the same and it's a 95 model too.

I think there was a change over in the 95's where they were different (slightly) to the 93 and 94's, and not excatly the same as the series 2's either.

The 95's must have been the morph of the 94 to the 96's !!!

J

saw a R33 today under the engine bay and its the same as yours. My R32 has another small box which plugs into those 4 screw holes in your graphical circle. It's wired up inline with that unit you have there also and the coils, i ran a switch across the earth wire as a DIY immobiliser for a few weeks, hehe

dodgy brotheeeeers

Shaun

Originally posted by skyzerr33

ywlgtr

your right but in the series 2's the ingnightert box is under the cover (thats why theres lump in the cover on them) not on top like the series one. and kyms is a series one.

Nope - the ignitor on the series 2's is built into each coil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...