Jump to content
SAU Community

Recommended Posts

Originally posted by Hicks

Dynos are all messed up. I pulled 240bhp at formaz and 270bhp

at genie. But i think formaz is the good one.

But that doesn't stop me from showin other people the 270 one.

The genie one is a good 'car seller' :P

I ran a guy who just had a fresh 305rwhp chart from the genie dyno and handed him his ass several times at no stage did he ever look like keeping up. In the real world i don't think I've got any more than 200rwhp ( I've not had a dyno for a long time all the same).

Formaz sounds good for just $50 a run.:(

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99215
Share on other sites

Originally posted by macka

Ive heard the Formaz one is a "hard" dyno so should be interesting...

Im booked in at cyphers tomorrow for an AFC tune so they use the formaz one shall be interesting what i may get i think boost will only be limited to Injector duty cycle now :D

Fingers crossed it dont blow hehe

Formaz would be 'hard' compared to the likes of genie and myaree. At least if you have been there before you will be able to get some idea of the HP change.

As far as stock injectors go. If you do the whatisname trick and fit the 044 and a malpassi you will be laughing all the way to 250+rwkw on stock injectors. I wouldn't try it on the smaller bosch pumps tho' they choke up flow at high pressures (even though they flow more than stock at the same pressure).

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99661
Share on other sites

Originally posted by rev210

Formaz would be 'hard' compared to the likes of genie and myaree. At least if you have been there before you will be able to get some idea of the HP change.  

As far as stock injectors go. If you do the whatisname trick and fit the 044 and a malpassi you will be laughing all the way to 250+rwkw on stock injectors. I wouldn't try it on the smaller bosch pumps tho' they choke up flow at high pressures (even though they flow more than stock at the same pressure).

A wet paper bag is harder than Genies and Myarees dyno :D

Maybe a bit harsher than Psis and Barrys altho just a guess

United fuel injection damn u gotta have a good car to get any sort of figures on that bloody thing hehe

Ive done the 910 pump but going to do the Rising reg at a later date.. I just want to make sure my airflow meter and injectors have headroom :D then ill be back to the drags chasing gradenkos tail hehe...oh and yours!

Looks like the pineapples will go in aftrwards too

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99690
Share on other sites

Originally posted by macka

A wet paper bag is harder than Genies and Myarees dyno :D

Maybe a bit harsher than Psis and Barrys altho just a guess

United fuel injection damn u gotta have a good car to get any sort of figures  on that bloody thing hehe

Ive done the 910 pump but going to do the Rising reg at a later date.. I just want to make sure my airflow meter and injectors have headroom :D then ill be back to the drags chasing gradenkos tail hehe...oh and yours!

Looks like the pineapples will go in aftrwards too

Chase MY tail? I think with the pineapples on you will show a clean pair of heals to my slow car.:D

I'm hoping you do get 300+rwhp and start with some 12.5's to show up those GTR boys and girls:D

910's are pretty good as an upgrade. I'd look around for some 550cc injectors as opposed to doing the rising rate if you are going to stick with that pump (lets face it 910's are nice and quiet)

What fuel management are you running macka?

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99707
Share on other sites

Originally posted by rev210

Chase MY tail? I think with the pineapples on you will show a clean pair of heals to my slow car.:D

I'm hoping you do get 300+rwhp and start with some 12.5's to show up those GTR boys and girls:D

910's are pretty good as an upgrade. I'd look around for some 550cc injectors as opposed to doing the rising rate if you are going to stick with that pump (lets face it 910's are nice and quiet)

What fuel management are you running macka?

Cant be too optimistic :D

I got [email protected] psi at psis not long ago so i should easy get 300 but ya never know,..

Im running a top secret ROM which seems to only control ignition and im getting the Safc tuned tomorrow at 16psi dont worry i have a decompressed engine

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99736
Share on other sites

Originally posted by macka

then ill be back to the drags chasing gradenkos tail hehe...oh and yours!

Or more than likley, you'll be showing us your tail. :D In any case, your outta range for the stock turbo award :D

Speaking of fuel pumps, Barrie showed me a Walbro in tank pump yesterday, a bit of a change from Bosch I thought. Seems like a good deal though, flows 195ltr/hr, enough for 500hp for $220 and a higher model available that flows 255 ltr/hr and can handle high pressure.

http://www.autoperformanceengineering.com/...l/fuelpump.html

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99742
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the linkie. Certainly always a great deal of help when people post comparisons like these, but I think for now I'll stay away from any semi slicks. I did go ahead and order the sportcontact 7. My buddy has them on his modified A4 and he keeps saying how good they are. For my intended purposes these will probably work real well. I'll report on them once I had the chance to try them out
    • Talk about noisy. Even when I still had the Tomei under the car I could distinctly hear the tires rolling. And I doubt I ever will need maximum grip like on a track. My GTR will maybe never even see the 600hp mark and I need to get used to the car quite a bit before challenging the limits of its handling. For the next winter storage I think I will get a set of these rubber drive-on thingies that have a tire shaped base. Those supposedly really help prevent flat spots.
    • Well our climate is definitely way less hot overall and the weather can be quite picky at times. I just know that during normal road use or even spirited drives there is no way I'd be able to consistently stay in the operating temperature, and constantly changing the tire pressure would also be a royal pain.
    • Input shaft bearing. They all do it. There is always rollover noise in Nissan boxes - particularly the big box. Don't worry about it unless it gets really growly.
    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
×
×
  • Create New...