Jump to content
SAU Community

Recommended Posts

On Saturday I got my S-AFC2 tuned at UAS, mid range is a lot more responsive.

All has been fine daily driving until last night. It stalled twice whilst sitting in traffic (yes it was out of gear). It also stalled last night when my turbo timer was counting down.

Any one got any suggestions? I was thinking of making my idle a bit higher (currently around 700rpm) but I don't really want to do that. It could possibly be a bad batch of fuel as I filled up yesterday afternoon.

Link to comment
https://www.sau.com.au/forums/topic/66129-s-afc2-tunedbut-now-i-stall/
Share on other sites

Sounds like the caps on your flux capacitor are starting to crack.

nah, seriously, I know there is some setting on there that prevents the car stalling from atmo BOV's. It is in the extra's menu I think.

what BOV do you have?

stock.

My mods are: FMIC, exhaust, fuel pump.

How was the wiring done?

A plug used as recommended for the AFM wire?

I found the plugs to cause a few little issues, at first it was ok, my only guess is that it began to build up some sort of corrosion causing a slightly bad contact. Similiar to how some incar light globes need to be turned or touched to get working again. If that makes sense. :)

I had to remove the plug and resolder the wire back together as I was receiving random (sometimes days between) stalls and cut outs while driving and idling. If idling the car would stall and start back up instantly. Very random.

Mr. Cerial what power did you make? boost? & ign. timing?

Any chance of a dyno run scan? :P

I have no idea about the wiring. Adam from UAS did it and soldered the wire onto the loom (I'm assuming he did that as I saw him use a soldering iron). I'll take a look a the wiring tonight.

Cubes - I'll get a scan up of the dyno chart tomorrow as I don't have a scanner at home. Car made 148.4rwkw on 0.8bar of boost.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...