Jump to content
SAU Community

Recommended Posts

2540 is still one week away.

GT30 and 35r's are still two weeks away.

Everyone has run out of stock so I am waiting on new arivals.

Sorry it has taken me so long to reply, I have been running the shop while the manager is sick and have been back til 8 every night. I know this is no excuse but I'll try to clear up all previous questions in my next post.

ok, i'm after a :

he needs one this week - any chance?

  • Replies 288
  • Created
  • Last Reply

Top Posters In This Topic

I am interested in a new turbo. Was thinking about Garrett GT35R what size exhaust wheel can these come in? Also what price would something bigger be GT40 or 42?

0.82 and 1.06 that I know of but there could be some more.

On the 0.82 you would get your boost coming in at around 3300-3500.

But it punches more air than stock skyline turbos so running 10 psi will feel like 16 on the standard highflow one.

A GT40R comes in 0.95 and 1.06. Only good if your engine is putting out more than 400hp by itself.

If there are some GT35r's avalaible once you find out let me know and i'll grab one off ya!

Cheers

Dave

Should be mid-late next week or early the following. Hopefully he won't stuff me around but if you say you want one, I'll get it in for you. Just say the word.

I am also interested in a GT35R with .82 exh housing.

How much would freight bo to Tassie?

"Money on the fridge wog"

Just kidding...hope you aren't greek or something lol.

I don't know how much freight would be to Tassie. You might be able to ask thepost office...I rarely have time to stop in on my busy schedule.. They are still 2 or so weeks away. Garrett have a huge order coming in.

hey mate, very interested in getting a turbo of you, just need some advice first

How much horsepower/kilowatts do you want? =210rwkw

What are you using the car for? = Street

When do you want boost roughly? = 2200/2500

Do you want power early or late in the rev range = early

What Mods you engine has or is going to have including computers or exhaust etc = 3' turbo back, pod+cai, am organising powerfc, FMIC and turbo(this is where you come in)

Obviously, what car? = R32 Gtst

Intercooled? and is it large, small, medium = will be med

Still running AFM or upgraded or no longer there = stock

Custom exhaust manifold or standard? (custom exhaust manifolds give you more options) = standard

External wastegate or internal(limited to virtually 450hp)?

It seems like people are recommending this 2530 for this setup correct ?

i know 210rwkw isnt huge, but its all i feel i really need. I was planning on high-flow but it seems like for a bit extra i can give myself much more potential in the future perhaps.. ??

TimmyC,

Check out the TD06 8cm turbo Roy is running and his results over here. Huge mid range excellent 250rwkw top end potential with what I consider very minimal lag.

The TD06 paired up with the 8cm housing is the my new turbo of choice for the rb20det.

Dan,

Can i also get a price on a 1.06 exh housing for a GT35R

** as far as i know GT35R's ARE GT35/40 <- thats the old sk00l way of talkin about them

sooky syphon wants an internally wastegated exh housing.. ie XR6T turbo...

edit: your PM box was full

Can you please advise your comments on the following as I have just through the process myself of sourcing a turbo and the feed back I've got:

GT35/40r ar0.70 and ar1.06 can be sourced with an internal wastegate rated 700hp

with ceramic ball bearings

RB25 HiFlow with the right internals is capable of 550hp

The hiflow is meant to come on boost quicker with a good mid range torque, but the GT would have the legs in the top end.

I'm being told the Hiflow has a better durability in case of backfire, better torque range for circuit racing.

The Hiflow will cost me $1,750 because of the rated internals ie bigger shaft than the GT, wheels and bearings, however unable to get the specs (all top secret stuff)

What is the cost of the GT35/40R?

Can you please advise the spec on the hi flow equipment used?

- shaft size and brand

- Wheel brand

- finished AR compressor and turbine

- type of bearings

- timing (I assume it exchange)

Dan,

Can i also get a price on a 1.06 exh housing for a GT35R

** as far as i know GT35R's ARE GT35/40 <- thats the old sk00l way of talkin about them

sooky syphon wants an internally wastegated exh housing.. ie XR6T turbo...

edit: your PM box was full

PM has been emptied...sory for that.

Also. The 35R is not the same as the 35/40. The 35R is external gate and rated at 600-650hp. The 35/40 is internal gate and rated at roughly 450hp. You can, however, make a turbo based on the XR6 exhaust combined with a 35R to make it internally gated and still rated at 650hp. But they cannot copy the Ford turbo for obvious reasons....even though they made it.

Price on the exhaust housing is about $650-700. in that size. Can't get one for around 3 months though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...