Jump to content
SAU Community

Recommended Posts

hey guys I'm looking to sell my rebuilt Greddy T67-25g 12cm turbo as it isnt big enough for my gtir may consider swap for a t76, t88 or a Garrett 3540, as im chasing big HP out of this car and the t67 isnt going to produce the power i need,

Im after 2100 for it but all offers will be considered

Link to comment
https://www.sau.com.au/forums/topic/66248-fs-greddy-t-67-25g/
Share on other sites

  • 3 weeks later...
  • 4 weeks later...

Different car mate mines in NSW, As for the big turbo I changed my mind about the setup im going no longer a stroker kit so really the biggest im after is either a GT3540 or a T78-29d 14cm.

give us details

who rebuilt it

did they use garrett crap or genuine trust/greddy internals

do you have smaller exhaust housings to come with it?

manifold/gate?

- adz

Ok as far as the rebuild goes it was done before i bought it in perth with greddy internals as far as i know as i didnt recieve the reciept with the sale or the gaskets i was supposed to get, this housing is the only one i have for it, no manfiold or gate but what do you expect for the price seriously....

I had this on my GTi-R with no problems what so ever except for the fact that my engine blew which was no fault of nor did it damage the turbo started making boost at around 3500 on the car so for a RB it shouldnt be a problem spooling, would make a great street or drift turbo......

Adam

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Before starting any work, we attempted to adjust the tune. However even after adjusting it to certain extremes like completely stopping fuel, it had no effect. What fixed it was removing the Nistune Board and installing the original EPROM instead. This immediately fixed the issue. Everything should have been fine with the Nistune Board installation, so I am unsure why it has caused a problem. The soldered connector is also properly soldered. This worked when I first got the 550cc injectors, before cleaning, but that may have been a coincidence.  We ended up not installing the fuel pump hanger (at least for now). So currently running stock injectors, stock fuel pump, stock fuel pump hanger – Well everything stock except the exhaust. Now I have around €1400 in Nistune, Injectors, and Hanger collecting dust for the time being, perhaps I'll install them in the future. For now I'll enjoy the car as is 😁 Thanks a lot for all your assistance, I really appreciate all the help you have given me.
    • The turbo can’t be the issue. They’re proven to make much much power than you’re making. There is something in the setup that isn’t correct. - has the exhaust got any silly step downs? - what exhaust manifold?
    • Ok, just the way you wrote it made it look like you had the stagger the wrong way around 
    • I was getting anxious with the DVLA not knowing if the paperwork is fine or not, so I rang them. No update had been given, but I  was reassured that providing the box was ticked on the V750 then the application will go through fine. I've been checking the DVLA website pretty much every day, in the hope that it would have been done. Fast forward to Monday 29th  and I was greeted with a new screen on the check, and it finally showed as Taxed and MOT'd, woohoo! The car was in desperate need of a clean, not knowing when this day was coming it was put off. As far as I was concerned I had another 3 weeks  I'm not normally one for using snow foam, but I wanted to give it another try It hasn't cleaned up too bad considering it's 21 years old and lived on a boat for a number of weeks. The personalised number plate is J2 XBK, an illegally spaced number plate would have it read J2X BK. BK could either represent  the colour black or Baker, which is my surname. I filmed the first drive, the Youtube link will be at the end. I used the same driving route I did with the 323F V6 when I had a new exhaust installed, heres a couple of photos A few more since then Youtube video can be viewed here: https://www.youtube.com/watch?v=TjkFHPzjGDw
×
×
  • Create New...