Jump to content
SAU Community

Recommended Posts

Look at these baby's

They are the little brothers of the BFG drag comp radial TA's, for those of us who can't fit a 255/45/17 under our rear guards and don't want to give up much handling.

http://www.bfgoodrichtires.com/assets/pdf/...drag_radial.pdf

The nice low profile gives nothing away on road handling and at the strip...well next best thing to slicks.

Who sells these suckers in Australia?

Link to comment
https://www.sau.com.au/forums/topic/6625-best-streetstrip-tyre-around/
Share on other sites

I cant tell you for sure but i think nitto 555 would last alot longer then the BFs as on the nitto site they say you can get something like 15000 miles worth under NORMAL driving which is dam heaps i was going to get the BFstreet slicks for my torana but dad talk me out of them because tread depths are sh!t all but at the same time my dad has hook ups in the tyre world so he is going to get me some nittos and i will let you know how i go.

If you get the BFs let me know how they hook up thanks.

Ash.

Sorry i did say what i was going to which is that Michelin own BFG so just look for someone in your area that does michelin and they should be able to get you the BF street slicks, and just to let you know that the more traction you have that more strain is put on driveline too and more chance of a BOOM lol.

I just had a look at that pdf file you attached...

I hope you never drive your car in the wet, because judging by the tread design on those tyres, your first drive in the rain will be your last.

Go for the Dunlop D01Js or Nitto NT-555Rs... They wear reasonably, have excellent grip, and have much MUCH better water channelling properties than those BFG g-Force T/As...

Falken AZENIS are reputedly better in the wet than the D01Js and NT-555Rs, but aren't even in the same league for dry grip.

Originally posted by Merli

I just had a look at that pdf file you attached...

I hope you never drive your car in the wet, because judging by the tread design on those tyres, your first drive in the rain will be your last.

Go for the Dunlop D01Js or Nitto NT-555Rs... They wear reasonably, have excellent grip, and have much MUCH better water channelling properties than those BFG g-Force T/As...

Falken AZENIS are reputedly better in the wet than the D01Js and NT-555Rs, but aren't even in the same league for dry grip.

Nitto's,like the BFGs are horrible in the wet and 15,000 miles worth of normal driving (read I drive like a 90 year old on sedatives) wear aint much at all. Thats just what you get for essentially 'shaved' tyres.

BFG's from all accounts I've heard out perform Nitto's hands down on a strip.

Rear wheel drive skylines need no encouragement to go sideways wet or dry. The only alternative is to drive like you are supposed to in the wet (ie: like nana) BFG's or not (Mind you over here in the west I think rain has become but a memory).

Up against it's 'real' drag/street peers (mickey t dot's etc) the BFG's put up a better road proposition ,be it with the enevitable drawbacks a tyre that close to race spec will attract.

Originally posted by torana_mad

Sorry i did say what i was going to which is that Michelin own BFG so just look for someone in your area that does michelin and they should be able to get you the BF street slicks, and just to let you know that the more traction you have that more strain is put on driveline too and more chance of a BOOM lol.

The 'boom' part is right :P I lost count of how many gearboxes, diffs and axles I've replaced on other cars with 'real' power. At least my skyline hasn't got enough torque to do any harm at this stage.

Originally posted by torana_mad

Sorry i did say what i was going to which is that Michelin own BFG so just look for someone in your area that does michelin and they should be able to get you the BF street slicks, and just to let you know that the more traction you have that more strain is put on driveline too and more chance of a BOOM lol.

The 'boom' part is right :P I lost count of how many gearboxes, diffs and axles I've replaced on other cars with 'real' power. At least my skyline hasn't got enough torque to do any harm at this stage.

I ran the yoko 032r's at calder they were great couldn't ask for better grip in the dry in the wet and for normal street driving I would always run normal street tyres no point in usign any thing else btw drove the 032's in the wet they were ok nothing to rave about but adequete

meggala

for some good tyre info

try http://www.stuckey.com.au

or

http://www.vpwmailorder.com

OI would not go as far as gettign et street slick though on an old school v8 fine but not for a skyline

Guest Nismo_Freak
Originally posted by Merli

I just had a look at that pdf file you attached...

I hope you never drive your car in the wet, because judging by the tread design on those tyres, your first drive in the rain will be your last.

Go for the Dunlop D01Js or Nitto NT-555Rs... They wear reasonably, have excellent grip, and have much MUCH better water channelling properties than those BFG g-Force T/As...

Falken AZENIS are reputedly better in the wet than the D01Js and NT-555Rs, but aren't even in the same league for dry grip.

Also note that Falken Azenis will decimate the other tires in lateral grip... they are a cornering tire not a drag tire.

Had some really scary incidents on TAs in the wet. this was driving a GT falcon auto, not highly modded, just cam and a tune. The problem was going around 90 degree corners esp when braking into traffic. I had to idle the car into the traffic and when pointing in the right direction gently speed up. Hooked up great in the dry though.

I have euro t/a's in 245/50/15s and all i can say is that for the price the shops sell them for (almost $500 each) i would think they might have alittle more grip then they do and they suck when the road even gets alittle wet under power but off power they are ok.

Ash.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...