Jump to content
SAU Community

Recommended Posts

Mason mate. I take it you have the PFC in monitor mode with the peak hold switched on? You will find that the huge knock reading is from when you started the car with the peak hold still on. try this. switch car on, turn on peak hold, turn car off, now turn car back on and you'll see knock of like 80+. clear the peak hold (but leave it on) and now do a run. My worst knock reading was 30 something and that's with a 7000rpm launch...
Hi Richard, yep I had the PFC in monitor mode with peak hold switched on during each run. I usually don't have any probs with knock on start up (it usually stays under 10), but I actually cleared the peak hold just before I went into stage each time just to get an idea of the peak values during each run. The worrying thing was that the engine light started flashing during my run, so I backed off pretty quickly once that happened.

I spoke to the guys that tuned my car this morning and they're going to have a look at it on Saturday...apparantly it's only a minor adjustment.

nick, it's running around 12psi. I say around cause I haven't verified it with a proper boost gauge yet (just going off the reading on the profec).

Flaps, glad you liked it mate. The car is lightly modded. cat back exhaust, pod filters and PFC are the main power mods. I do like to launch at 7000rpm though :P

Mason, yeah, it's always a good idea to clear the peak as you get to the end of the queue. It's not a knock problem on start-up it's mechanical noise from the starter etc and the engine firing into life. just be aware that the knock sensor doesn't just detect engine detonation it can detect other vibrations too (and display them falsely as detonation). You are doing the right thing to have your tuner look at it though.

is there a website that has event pics from WSID street meets? I know of the little yellow van and I'll email them, but there were heaps of photographers there.

Yeah I had a chat with him, he's running a GT35 and was on Mickey thompson slicks with front runners the thing was launching that hard the rear was hitting and there were sparks

Really wish i'd given slicks ago with the old setup :)



  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...