Jump to content
SAU Community

Recommended Posts

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

I was playing the car has got very old tyres on it as you would have seen Brad and sliding and wheel spinning past the rotors the car has done 1.05 before with good tyres buying new set today but at $2000 per set you want to get the most out of them .anyone coming to oran park

It looks like the club will lose about $2k on this event so any entrants are most welcome!

Sorry, how is the NSW club going to be affected financially by attendance being down on a track day?!?!?! Please explain.

Adrian

We were committed to half the cost. When you hire a track you have to pay for it. If we had more than the minimum required entrants to break even we would have made a profit (like last time).

I was playing the car has got very old tyres on it as you would have seen Brad and sliding and wheel spinning past the rotors the car has done 1.05 before with good tyres buying new set today but at $2000 per set you want to get the most out of them .anyone coming to oran park

I'm not doubting the speed of the car at all, but you have to compare apples to apples :(

Would love to get out to Oran but not going anywhere til I get the over heating issue sorted and fix the sway bar mount that i broke.

Brad

hahaha sorry after rereading it I notice it sounds like can we lose $$ aswell, what I meant was can SAU club organise and pay 1/2 for a drag day with another car club like it does with track days if the people organising it were members?

Why does the club pay half of a track day event potentially losing (as in this case) thousands of dollars when Brett and I were both told that we couldn't use the club bank account to organise the drag day?

I'm confused.

Adrian

Incidentally, using the club account would've involved a 'NO LOSS whatsoever' situation - i.e. we just needed somewhere public to park the entrants dollars so people would feel more confident handing over the $$$.

Adrian

Adrian, SAU is trying to move towards running more events for our members, our first track hire was a financial success and so we committed to a second.

However due to a combination of poor notice and no turn out, we have taken a huge financial loss this time, obviously this is the risk we take organising events.

My guess is that the outcome of this will be that SAU NSW will not be sticking its neck out financially for an event in the near future since no members were interested.

As I remember the situation with the WSID day was:

a) the club was happy to be involved organising

B) WSID did not allow us to be involved (had to be a private booking) due to issues on the Pac day

c) Brett was good enough to personally take the financial risk.

as the club was not involved it was not appropriate to use the club account, this is exactly the same appraoch as we take to the motoconcepts track day.

Finally, you are the club's drag event representative, so IMHO its not appropriate for you to complain that the club is not organising drag events :D

This track day was a huge disappointment to the exec committee, and I would love to see it being the topic of serious discussion among the members who join us at the AGM. Those who chose not to attend can STFU.

Thanks Duncan for saving me from dredging back through the WSID day threads, that is my recollection as well.

Adrian, as Duncan said the first track event we ran made a profit, this one did not. Feel free to step up to the plate for a position on the Executive Committee at the impending AGM as you obviously feel passionately about these issues.

It's good to see some concern for the club.

Adrian, SAU is trying to move towards running more events for our members, our first track hire was a financial success and so we committed to a second.  

However due to a combination of poor notice and no turn out, we have taken a huge financial loss this time, obviously this is the risk we take organising events.

Why organise a track day with little to no notice?

My guess is that the outcome of this will be that SAU NSW will not be sticking its neck out financially for an event in the near future since  no members were interested.

Proper planning and plenty of notice and PROMOTION means you're not sticking your neck out.

As I remember the situation with the WSID day was:

a) the club was happy to be involved organising

B) WSID did not allow us to be involved (had to be a private booking) due to issues on the Pac day

c) Brett was good enough to personally take the financial risk.

as the club was not involved it was not appropriate to use the club account, this is exactly the same appraoch as we take to the motoconcepts track day.

Fine, thankyou.

Finally, you are the club's drag event representative, so IMHO its not appropriate for you to complain that the club is not organising drag events :)

I beg your farking pardon??? Show me where in this thread I complained about us not organising drag events? :P

This track day was a huge disappointment to the exec committee, and I would love to see it being the topic of serious discussion among the members who join us at the AGM.  Those who chose not to attend can STFU.

Amen. Horrible result. :)

Thanks Duncan for saving me from dredging back through the WSID day threads, that is my recollection as well.

Adrian, as Duncan said the first track event we ran made a profit, this one did not. Feel free to step up to the plate for a position on the Executive Committee at the impending AGM as you obviously feel passionately about these issues.

It's good to see some concern for the club.

Duncan & Dino:

1/ please see the executive nominations list for the last AGM.

2/ See you at the AGM.

Adrian, as I said "Feel free to step up to the plate for a position on the Executive Committee at the impending AGM...".

You may get lucky this year.

How are the nominations coming? Has anyone stepped up for anything?

  • 2 weeks later...

RENEW have informed me that they are sending a cheque for ~$1200 to us as this is the profit they would have made on the day. Our arrangement with them is that the event should make a profit before either club does.

So it looks like we lost ~$1300 on this one.

Big thankyou to Brad and the others at RENEW. ;)




  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...