Jump to content
SAU Community

Recommended Posts

Hi. Im thinking of spending $5k on my R33 GTS-t. So far it has POD, 3" zaust from turbo, 'cooler and is lowered with mags.

Any suggestion as to what to spend this $5k on? i admit i dont know much about this stuff, but was thinking maybe new turbo, injectors, fuel pump, computer etc. does anyone have any advice about this stuff? brands, sizes etc.

thanks for any help.

Link to comment
https://www.sau.com.au/forums/topic/66529-5k-budget/
Share on other sites

Hey mate i have a turbo package that would suit you, its only $1000,00. Which includes turbo, waste gate, all braided lines and chrome rfittings to suit, also comes with a hks pod filter and custom turbo blanket. That would leave you with $4000 and you could get a power fc and hi flowed injectors fitted and tuned for $2500. Than get a fuel pump bout $400 fitted and than the use the rest to set up the turbo it come with a factory warranty as well. Just a thought i can send u pics of the turbo if you like.

Link to comment
https://www.sau.com.au/forums/topic/66529-5k-budget/#findComment-1238258
Share on other sites

nengun had a gtrs for rb25 kit for $4500 i think it was. powerfc, boost controller kit, gtrs turbo, injectors all fittings and gaskets etc. would be well suited. however you would still need a clutch, good tyres and a set of cams for more midrange power. the gtrs on rb25 can do around 260rwkw (ish) check out rb25 turbo upgrade thread a few months ago.

Link to comment
https://www.sau.com.au/forums/topic/66529-5k-budget/#findComment-1238292
Share on other sites

I just did the gtrs $2912, 6 nismo 555cc injectors $939, power fc and boost kit $1510 + $250 shipping got 270rwkw at 1.2 bar and good response. Also need z32 airflow meter $295 and dyno tune and installation. But you could do it with out the z32 and injectors and keep the boost a bit lower and keep it under 250rwkw.

Link to comment
https://www.sau.com.au/forums/topic/66529-5k-budget/#findComment-1239876
Share on other sites

I just did the gtrs $2912, 6 nismo 555cc injectors $939, power fc and boost kit $1510 + $250 shipping got 270rwkw at 1.2 bar and good response. Also need z32 airflow meter $295 and dyno tune and installation. But you could do it with out the z32 and injectors and keep the boost a bit lower and keep it under 250rwkw and do the rest later.

Link to comment
https://www.sau.com.au/forums/topic/66529-5k-budget/#findComment-1239881
Share on other sites

HD Clutch =$1200 installed

exhaust side adjustable cam gear - $250 installed

PFC + boost controller kit= $1500 + fitted & tune ($400)

Borch Fuel Pump $350 installed

gcg BB high flow - 1800 installed

220rwkw should not be a problem

once u got the $$ for injector and head gasket 250+ is achivable

Link to comment
https://www.sau.com.au/forums/topic/66529-5k-budget/#findComment-1240082
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • You now say stumble, but you said cut out before. Will it slow rev through the cut/stumble? What gap were your spark plugs set to when you them in?
    • I had double clamped all the pipes but I checked them over any way, everything tight and secure. feels and sounds like a electrical short/failure, as it is an abrupt and aggressive stumble, that instantly comes and goes right at 4k mark...like clock work fuel pump and filter are new new coils and plugs injectors where cleaned and tested 200 miles plus ago no black smoke cleaned MAF   same results, other ideas? some other sensor?  
    • Yes, just without the annoying use of the word hybrid. We stopped using that term 20 years ago when we realised it meant different things to different people. Even "highflow" can represent more than one way of achieving the goal of getting more flow out of a turbo. But at least it says what it does on the box.
    • OH, when they say "solid buckets", I always interpeted that as "shimless". (Which is not the same as the "shimness word I invented above to represent the same idea that the buckets act as shims also!!). Still the same problem though. So it appears that buying a "kit" from Tomei is a two step process. Makes sense. Doesn't make sense in the context of a "kit" though.
    • Wanted to add some of my R33 GTST  R34 GTR wheels, 18x9 ET30 with 255/35/R18 PS4S'   BBS RE-V7 029 18x9.5 ET22 with 255/35/R18 PS4S' Needs a bit of camber   
×
×
  • Create New...