Jump to content
SAU Community

Recommended Posts

Hey fellas

I saw in a recent post about RB26 Cams in an RB20. I would like to do this, but i have seen that with the stock ECU the idle is pretty messy. If i had a powerfc and got it tuned properly would the car idle better?

Also does anyone have a rough idea of how much increase i would get from this mod?

Finally anyone know the cost of RB26 Cams?

Thanks heaps!

Link to comment
https://www.sau.com.au/forums/topic/66891-rb26-cams-in-rb20-with-power-fc/
Share on other sites

Basicly the workshop doing my tuning has a spare set of 26 cams laying around, so they are gonna fit them up and see what they can do. Should be very interesting. But im prepared to buy tomei cams and adjustable cam gears if needs be later on down the track.

yeah i had a look on nengun.com at cams. then saw someone here put rb26 cams in an RB25 and also an RB20 and they said idle was a little rough so i thought if you had an aftermarket ecu it would make the car idle easier as you could change heaps of stuf etc etc.

It was tried on my car with re-written ecu and Pfc. The results werent that great, ie hopeless.

You can get RB20 cams for around $850, i suggest you get the real deal, or at least get the RB26 cams machined to suit the hydrualics. Thats based on my experience, others seem to have had more luck, but i know of two first hand instances where it was a waste of time, and in my case a waste of money.

Waz, with all due respect, ill bet money you were either sold RB25DE/RB20DET/De cams or something. Or the mechanic that installed your cams still has the RB26 cams sitting in the back of his workshop.

Not meaning to doubt you, but sometimes people you trust lead you astray. I am willing to be proven wrong, and not that you have to prove anything, but i would love to hear from someone that knows for a fact that the cams they have in their hot little hands are RB26 DETT cams, and were isntalled by them , or the installation was witnessed.

It sounds old school tuff, but it just didnt work:(

Waz, with all due respect, ill bet money you were either sold RB25DE/RB20DET/De cams or something. Or the mechanic that installed your cams still has the RB26 cams sitting in the back of his workshop.  

Not meaning to doubt you, but sometimes people you trust lead you astray. I am willing to be proven wrong, and not that you have to prove anything, but i would love to hear from someone that knows for a fact that the cams they have in their hot little hands are RB26 DETT cams, and were isntalled by them , or the installation was witnessed.

It sounds old school tuff, but it just didnt work:(

i don't know what to say to that other than

- my mechanic would not stock any other parts

- i saw the old cams that came out of the engine before they went into the bin (they acutually snapped one getting it out)

- mechanic is a friend of the family

cams were purchased from GT51R who has (had) a well documented white R33 GTR Vspec so i have no reason to doubt the origins of the cams

yes, i actually have no ws of proving if they were specifically rb26 cams as there was no 'rb26' printed on them etc. but my mechanic said that they had a higher lift of about .5mm

next time you are in brisbane you are more than welcome to come and check them out if that is possible (as long as whatever you take off you replace) and you buy me a slab as compensation :P

Waz.

Waz, with all due respect, ill bet money you were either sold RB25DE/RB20DET/De cams or something. Or the mechanic that installed your cams still has the RB26 cams sitting in the back of his workshop.  

Not meaning to doubt you, but sometimes people you trust lead you astray. I am willing to be proven wrong, and not that you have to prove anything, but i would love to hear from someone that knows for a fact that the cams they have in their hot little hands are RB26 DETT cams, and were isntalled by them , or the installation was witnessed.

It sounds old school tuff, but it just didnt work:(

/bitch

Roy, meaning to doubt you but I would place a bet on the fact that your RB26 cams were not installed correctly, and the workshop handling your car had no f'ing idea and jerked you around. Quite possibly they have parts of yours lying around their workshop.

/bitch off

LOL...yeh the installation was definitely the problem with my car. The journal that i stole off Bl4ck32 had a different tolerance to mine. So after running for a while it started to gal, and the inlet cam borderline seized resulting in the timing belt to skip teeth. So i think i can attribute the damage aspect to the tool with the wrences (me) and the different sized journal. When the cams were removed the damage was most evident on that journal I7.

So my thing idled like a piece of sh1t, but i never drove it out the driveway. The cams were cleaned up and tried in a friends R33, and same deal, woudlnt idle too well. He went for a drive and the car was an absolute dog under 4,500rpm then it took off.

Admittedly the PFC wasnt tuned for it, but this particular R33 makes boost like a truck and has a turbo with similar performance to a 2530. So my experiences combined with his, using the exact same R33 GTR cams means that im a little gun shy now of the whole thing.

And personally, i would get them machined to suit the hydraulic lifters before installing them.

Now run off and find some more wicked sh1t to put on my car..just so i can spend the next 18 months farking around/up ...:P

Brisbane? Since when did you move from cold and dreary Melbourne.  

Based on mine and a friends experiences...well, happy to hear more from ppl that got the whole thing workign properly

moved up in jan to study medicine :)

the weather is so good its not funny...

OK didn't read the whole thread but for $280 incl. I can re-grind your GTR cams to hydraulic spec. This is a Nissan grind and it acutally makes the profile larger because there is no more clearance. Do not get overly excited about the increased size because it isn't a huge amount over the GTR cams but it does make them hydraulic and it WILL work in every instance. The area under the lift-duration plot (at the valve) is an increase of 5% over the GTR profile but this is all in lift. So this means you get the same duration at 0.050" but an extra 0.5mm lift at the valve. The base circle will be approximately 0.5mm smaller in diameter which the hydraulic buckets will take up.

I don't want to start a sh1t fight, just offering a solution.

Sorry I didn't organise this earlier Roy... :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Biggest thing is you're okay!   It sounds like between the accident, and the drive home, it was a pretty torturous trip again! On the bright side, you took the opportunity to enjoy the event more from the perspective of a spectator, than as an entrant!   Sad to see so much damage to the car. It really has taken a HUGE hit in the front end. If/when you choose to repair, hopefully the rails are straight (At least from shock tower backwards). Hopefully the extra cage coming through there has save most of the chassis rails, and HOPEFULLY saved the motor too. Best of luck when you eventually get motivated to start pulling it down to check it all out
    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
×
×
  • Create New...