Jump to content
SAU Community

Recommended Posts

  • 2 months later...
  • 3 weeks later...

No. None of the S series silvia's (S13/14/15) have crappy ceramic turbos. They are steel wheeled and most will handle up to 1 bar of boost easily.

The pick of any of the silvia turbos is the JDM spec S15 T28 Ball Bearing turbo. I have seen these turbos achieve 200rwk's with the right supporting mods.

Here's a rough guide:

S13 - T25G turbo (max power is approx 160rwkw)

S14 - T28 bush bearing (max power is approx 190rwkw)

S15 - T28 bush bearing ADM, ball bearing JDM. (max power approx 190 - 200rwkw)

Hi Guys,

I'll add my thoughts as I'm the proud owner of a JDM S15 2000 model, which I've had for a year now. I got hooked on these as a result of seeing a few 180's etc drift around Eastern Creek. I like the styling much better than the Skyline's and the interior is more stylish. I'm a member of the Central Coast thread and all my mates have Skylines.

I looked at getting an R33 and drove a few example of both cars.

The JDM S15 has a GTR diff and has about 25% more power stock than an Australian car. (They also got climate control A/C, rear wiper and most have an a pillar boost gauge).

As for comparison to an R33, they have a better power to weight ratio. Are more direct in the feel of the steering and handling (not as bulky) and are VERY PREDICTABLE, hence heaps of fun on the track.

I had originally planned to drop in an RB26 but after having the car at Sandown have now decicded that the SR20 rocks! They are cheaper to run and insure and there are heaps of great SR20 mods available.

Some say the 6 speeds aren't much chop, but I love it and haven't had any dramas with it.

There is only one downside as far as I'm concerned and that is the back seat is a joke compared to a Skyline and it is not real comfortable for the average adult on anything more than a short trip.

:laugh:

Bit off topic, but don't let people put you off the Silvia series.

the general feeling I get from lots of enthusiasts is, if you own a 200sx then you must love drift or are into drift.

They don't see that the 200sx makes a great circuit car. I'm building mine for fast lap times. Also at Wakefield recently, a competition drift car was the fastest on the day beating many circuit set up cars.

They don't see that the 200sx makes a great circuit car. I'm building mine for fast lap times. Also at Wakefield recently, a competition drift car was the fastest on the day beating many circuit set up cars.

If you're referring to DriftDaz in the S14a, the last time we were out at Eastern Creek he outran V8 ex-racecars.

That's the car. Darren Mew's S14a. It's devistatingly quick!!!

I only wish my S14a would do those lap times! I'll keep dreaming, some day.......hehehehe! Best time for me to date is only a 1:58.10 which would put me about 60th on that list! Far out there are some fast cars there.

I see that 3 nissan silvia's made it in the top ten. Not bad! I keep telling everyone they make an awesom circuit car but no one ever believes me!!

I have a trackday on the 24/2/07 at EC, so I'll have to see if I can improve on my times.

Edited by nismoman

Two.

Andrew Handmer was driving Daz's S14a - he helps work on the car.

Greg Boyle (aka Stretch) is the guy that runs Autosport Engineering in Kirrawee. He had an RB26DETT powered S13 for a while, but that engine got put into a GT-R later so I'm not sure what engine is was running to pull that 1:49.

Don't believe Dyno figures for S15s - the reason they pull such figures with small mods is because they're run on the dyno in 4th, like 5 speed cars but really the 1:1 gear in an S15 is 5th.

Its like running your 32 in 3rd for a power run, of course your gonna pull bigger figures.

damn cheaters

But my S14a doesn't hit max boost and max power until 4th gear, so it would read less if I dyno ran it in 3rd gear.

Plus I know that 3rd gear in my brother's R32 is closer to my 2nd gear. The gearing is really low in R32's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
×
×
  • Create New...