Jump to content
SAU Community

S15's please give some opinions

twoquik

By twoquik,
in General Automotive Discussion

 Share

Recommended Posts

  • 2 months later...
  • 3 weeks later...
nismoman Community Regular

nismoman

Posted
Posted

No. None of the S series silvia's (S13/14/15) have crappy ceramic turbos. They are steel wheeled and most will handle up to 1 bar of boost easily.

The pick of any of the silvia turbos is the JDM spec S15 T28 Ball Bearing turbo. I have seen these turbos achieve 200rwk's with the right supporting mods.

Here's a rough guide:

S13 - T25G turbo (max power is approx 160rwkw)

S14 - T28 bush bearing (max power is approx 190rwkw)

S15 - T28 bush bearing ADM, ball bearing JDM. (max power approx 190 - 200rwkw)

Tripin Explorer

Tripin

Posted
Posted

Hi Guys,

I'll add my thoughts as I'm the proud owner of a JDM S15 2000 model, which I've had for a year now. I got hooked on these as a result of seeing a few 180's etc drift around Eastern Creek. I like the styling much better than the Skyline's and the interior is more stylish. I'm a member of the Central Coast thread and all my mates have Skylines.

I looked at getting an R33 and drove a few example of both cars.

The JDM S15 has a GTR diff and has about 25% more power stock than an Australian car. (They also got climate control A/C, rear wiper and most have an a pillar boost gauge).

As for comparison to an R33, they have a better power to weight ratio. Are more direct in the feel of the steering and handling (not as bulky) and are VERY PREDICTABLE, hence heaps of fun on the track.

I had originally planned to drop in an RB26 but after having the car at Sandown have now decicded that the SR20 rocks! They are cheaper to run and insure and there are heaps of great SR20 mods available.

Some say the 6 speeds aren't much chop, but I love it and haven't had any dramas with it.

There is only one downside as far as I'm concerned and that is the back seat is a joke compared to a Skyline and it is not real comfortable for the average adult on anything more than a short trip.

:laugh:

nismoman Community Regular

nismoman

Posted
Posted

Bit off topic, but don't let people put you off the Silvia series.

the general feeling I get from lots of enthusiasts is, if you own a 200sx then you must love drift or are into drift.

They don't see that the 200sx makes a great circuit car. I'm building mine for fast lap times. Also at Wakefield recently, a competition drift car was the fastest on the day beating many circuit set up cars.

scathing Grand Master

scathing

Posted
Posted
They don't see that the 200sx makes a great circuit car. I'm building mine for fast lap times. Also at Wakefield recently, a competition drift car was the fastest on the day beating many circuit set up cars.

If you're referring to DriftDaz in the S14a, the last time we were out at Eastern Creek he outran V8 ex-racecars.

nismoman Community Regular

nismoman

Posted
Posted (edited)

That's the car. Darren Mew's S14a. It's devistatingly quick!!!

I only wish my S14a would do those lap times! I'll keep dreaming, some day.......hehehehe! Best time for me to date is only a 1:58.10 which would put me about 60th on that list! Far out there are some fast cars there.

I see that 3 nissan silvia's made it in the top ten. Not bad! I keep telling everyone they make an awesom circuit car but no one ever believes me!!

I have a trackday on the 24/2/07 at EC, so I'll have to see if I can improve on my times.

Edited by nismoman
scathing Grand Master

scathing

Posted
Posted

Two.

Andrew Handmer was driving Daz's S14a - he helps work on the car.

Greg Boyle (aka Stretch) is the guy that runs Autosport Engineering in Kirrawee. He had an RB26DETT powered S13 for a while, but that engine got put into a GT-R later so I'm not sure what engine is was running to pull that 1:49.

Black Betty Community Regular

Black Betty

Posted
Posted

Don't believe Dyno figures for S15s - the reason they pull such figures with small mods is because they're run on the dyno in 4th, like 5 speed cars but really the 1:1 gear in an S15 is 5th.

Its like running your 32 in 3rd for a power run, of course your gonna pull bigger figures.

damn cheaters

nismoman Community Regular

nismoman

Posted
Posted

But my S14a doesn't hit max boost and max power until 4th gear, so it would read less if I dyno ran it in 3rd gear.

Plus I know that 3rd gear in my brother's R32 is closer to my 2nd gear. The gearing is really low in R32's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...