Jump to content
SAU Community

Recommended Posts

This car has been modeled on Richards & Skafes Bathurst R32 1992 GTS-T Race Car

FOR SALE offers above $30 000

This race car is turn key ready, there is nothing to do,

Has been racing for 2 seasons and just refreshed the motor, listed below are some of the many parts and modifications done. Have spent over $70000 on building.

RB 20 tuned to 300 Hp potential for more.

TO4 turbo with custom steam pipe exhuast manifold

Custom inlet manifold

45mm progate external waste gate

wolf 3D version 4 computer

brass button 2500 lb clutch

custom close ratio gearbox with steel slectors

Kaz locker 4.3 to 1 ratio diff

Adjustable apexi suspension

4 spot brakes with big disks

pagen race pads

large intercooler

engine oil cooler

remote oil filter

custom aluminum race radiator

corbeau race seats

willans 5 point race harnesses

full wieght reduction

foam filled fuel cell

bosch motor sports fuel pumps

CAMS approved super car roll cage

tilton braking system with bias control

Braided brake lines

momo leather steering wheel

Has full CAMS log books

Car was raced for 2 seasons with out an accident and is In show car condition.

Have numerous photos

Please contact me on 08 9578 3303 and ask for Peter

Link to comment
https://www.sau.com.au/forums/topic/67065-race-car-r32-1992-gts-t-for-sale/
Share on other sites

where did you add the pictures?

I can't see any..

and when you say

This car has been modeled on Richards & Skafes Bathurst R32 1992 GTS-T Race Car

I assume you either mean GTR or just the colour code of the gtr so red with white wheels or something.

I'm just a little consufed as to what makes this r32 gtst with some nice mods worth over $30K

or was that a typo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...