Jump to content
SAU Community

Australian Delivered Gtr 1991 - $39000 firm

Marko R1
 Share

Recommended Posts

Marko R1 Grand Master

Marko R1

Posted
Posted

***NEW PRICE DROP $39000***

- This car is in impeccable condition, you must see to appreciate!

- 1 of 63 Australian Delivered (fyi, remaining 37 of 100 were unsold)

- full stamped service history & log books

- 91000km, major service complete

- faultless condition

Modifications:

- Full body respray in Dec 2003 original silver $5000

- 100mm core intercooler, anodised black to appear as standard

- Blitz SUS steel mesh pod filters

- Samco blue silicone hoses for intercooler plumbing (x4)

- Earls oil cooler fitted with braided lines

- Blitz turbo timer

- Greddy cam gears

- Apexi boost controller

- Apexi Power FC

- Apexi hand controller

- Nismo N1 spec turbos

- Nismo high pressure fuel pump

- Nismo adjustable fuel pressure regulator

- Nismo front brace

- Nismo front strut brace

- DBA front discs, slotted & ventilated

- Custom heavy duty clutch & pressure plate, set to 3500ft/lb

- 3 inch custom exhaust from turbos with race tuned length headers

- New polyurethane bushes all around for suspension

- A/C regas with R134a

- Rear differential oil cooler

- New battery

- New timing belt fitted, I have also kept the old timing belt

- Iridium platinum spark plugs

- Tinted windows

Suspension:

- KYB rear shocks adjustable with King Springs

- Koni front shocks adjustable with King springs

- Full set of original GTR shocks & springs retained

Security:

- Cartrack satellite alarm system

- 6 point immobiliser alarm

- Keypad immobiliser fitted to centre console

- 2 other kill switches hidden in car for fuel & ignition

Wheels:

- 17" Regamaster Evo wheels, lightweight race, sold

- Factory GTR wheels

Sound:

- Clarion cd radio

- Response front & rear speakers 6.5"

All factory standard gear retained such as ecu, cam gears, exhaust, radio, wheels, air box (k&n element) & suspension.

Thanks guys,

Marko.

Merli Grand Master

Merli

Posted
Posted
sorry mate, having probs with my isp...

the car is a 1991 model - all aust spec gtr's were released in 91

Indeed they were, sorry, missed the year in the thread subject, was just looking at the body of the post :Oops:

Good luck with the sale, hope you get what you're asking for!

Ashy Larry Grand Master

Ashy Larry

Posted
Posted

I saw this car in Cronulla in Nov last year, It is Amazing... Not a single fault

.....

Hope all goes well with the sale, and Congrats to whoever the new owner is....

Mike

  • 3 weeks later...
Marko R1 Grand Master

Marko R1

Posted
  • Author
Posted

the aust delivered has integrated indicators in the 2 outer 'hot plates' (i.e. tail lights) & the reverse lights sit in between the actual tail lights...

you may be confused with the import version - reverse lights actually reside in the bumper bar directly next to the number plate.

marko.

  • 3 weeks later...
Marko R1 Grand Master

Marko R1

Posted
  • Author
Posted

I fitted a set of Blitz SUS pod filters (steel mesh type) then had the car dyno tuned by Jim @ Croydon Racing Development for $1200, aka Croydon Autosports.

It is now running 242kw at all wheels (300kw at rear wheels) with 540Nm of torque, see attached dyno graph.

Jim commented that the condition of my car is 1 of the best he has seen in a long time & the car is a great all rounder setup for track days & every day use.

gtr fan Experienced

gtr fan

Posted
Posted

This looks and sounds like a great car, I love my aus delivered gtr, I dunno how your bringing yourself to part with this car Marko, especially for that price!

Good luck with it!

P.S. Whoever buys this car let me know I would love to see it in the flesh.

Marko R1 Grand Master

Marko R1

Posted
  • Author
Posted

Hi Rohin,

Thank you for the compliment :)

It is a tough decision but its a commitment i've decided to stick to...Australian delivered GTR's are a rarity in itself let alone the condition the car is in.

Marko.

Marko R1 Grand Master

Marko R1

Posted
  • Author
Posted

the car was resprayed as it had stone chips on the front & side of the car from general driving.

the previous owner is a good friend of mine that had it for 6 yrs in the garage, he was just as meticulous as i am.

it was done just to freshen it up for none other than aesthetic purposes!

you need to see the quality & care taken with the car to understand.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      And if you have to drill the oil block, then just drill it for 1/4" and tap it BSP and get a 1/8 to 1/4 BSP bush. The Nissan sender will go straight in and the bush will suit the newly tapped hole. And it will be real strong, to boot.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      No it doesn't. It just needs an ezy-out to pull that broken bit of alloy out of the hole and presto chango - it will be back to being a 1/8" hole tapped NPT. as per @MBS206 recco. That would be for making what you had in alloy, in steel. If you wanted to do just that instead of remote mounting like @Duncan and I have been pushing. A steel fitting would be unbreakable (compared to that tragically skinny little alloy adapter). But remote mounting would almost certainly be 10x better. Small engineering shops abound all over the place. A lathe and 10 minutes of time = 2x six packs.
×
×
  • Create New...