Jump to content
SAU Community

Recommended Posts

rms is irrelevent.

Al is correct. You need to build a box with the specified volume from the manufacturer. It will sound like crap with the wrong size box. Not all 12" subs require the same volume.

If I may be so bold I might just pull you up on that comment champ.

When I design enclosures for subwoofers the T/S specs are not the only thing that I use in th PC. Power availability does have a huge impact on the design of the enclosure, as does the size of the car, the volume desired and the music styles listened too.

The most peculiar thing is that once the enclosure has been designed it often is no where near the recommended size. This is because many manufacturers often recommend the safest enclosure volume for minimal returns rather than the absolute best performing enclosure. :(

Just wanted to get that out. :P

Link to comment
https://www.sau.com.au/forums/topic/67291-size-for-box/#findComment-1259167
Share on other sites

39 leters is about the average size these days for a seald box as most subs for cars are, a seald box will allways make a sub produce more power. but on the other hand a ported or somtimes larger box will give the sub a nicer tone or note but is not done very often in cars as when you drive most of what you hear will be DOF! DOF! DOF! most peple in there teens or mid 20s dont realy care to much for tone as they prefer max volume - "if its to loud, your to old!"

Link to comment
https://www.sau.com.au/forums/topic/67291-size-for-box/#findComment-1267972
Share on other sites

hey just gonna pull you up on a few points there mate....

39 leters is about the average size these days for a seald box as most subs for cars are, a seald box will allways make a sub produce more power.

no, a sealed sub box will not produce more power. neither sub, nor enclosure will produce any power increase.

but on the other hand a ported or somtimes larger box will give the sub a nicer tone or note but is not done very often in cars as when you drive most of what you hear will be DOF! DOF! DOF! most peple in there teens or mid 20s dont realy care to much for tone as they prefer max volume - "if its to loud, your to old!"

ported/bandpass enclosures don't necessarily give a sub a nicer tone. in "most" instances, ported enclosures are used to optimise the output at or between certain frequencies. this is why you'll find most serious spl competitors using vented boxes and, lets be frank, most spl cars sound like ass when it comes to linearity and natural reproduction. vented boxes don't sound "nicer" in most respects either. while there are many drivers that sound lovely in the right ported/vented alignment, sealed designs usually offer much higher transient response (tightness/punch/impact/whatever adjective you like to use).

on one other note there, you're right in that increasing a sealed enclosure's volume will decrease Q (improve the sound.. sometimes). having said that, you shouldn't take a driver that sounds crap in a 30l enclosure and put it in a 100l box and hope it sounds good...

/end rant :)

d

Link to comment
https://www.sau.com.au/forums/topic/67291-size-for-box/#findComment-1270007
Share on other sites

  • 1 month later...

it is a known fact that a seld sab will always handel more power than a venteted one becouse the air in the box will pull the sub back faster than a ported so it dosent distort if you turn up the volume that little bit higher.

Link to comment
https://www.sau.com.au/forums/topic/67291-size-for-box/#findComment-1339736
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
    • ok. Yea, then I would need to remove the turbo and weld an adapter on to it instead, if I fuc* this one up.  
    • No. Only for a standard ECU with/without Nistune. Standalone has no need for it. That's like the 3rd time I've said so.   And as to that sensor linked - yes, it does look like it would be the right one. I've never bothered to see how available they were - just assumed that they'd be hard to find. I think I'd be planning to go Link ECU rather than buy sensors I don't actually want to make Nistune work, if I did not already have Nistune. As you do not already have Nistune, you should realy consider your options.
×
×
  • Create New...