Jump to content
SAU Community

Recommended Posts

I have a Cusco 6/7point Rollcage to trade.

I would have put it in my car but it wont fit because of the sunroof.

It will fit in any 2door r33 without a sunroof, GTR GTST etc ..

It is a bolt in cage so no welding is required, all bolts etc included

Im looking to swap it for a nice set of rims for my R33 GTST or a Bride passenger side seat with rails that will match the Bride fiberglass race shell seat that i have in the drivers side.

So if you have one of these that you would like to trade for one of the things i have let me know..

Ive attached a picture of the rollcage and a picture of my Bride seat

Email - [email protected]

Phone - 03 5335 9168

Link to comment
https://www.sau.com.au/forums/topic/67525-r33-rollcage/
Share on other sites

hey mate, firstly could you post a price or let me know what price your chasing. Second why doesnt it fit in a 33 with a sun roof. I have the same thing and was just wondering is it because it goes across the sun roof or is it because the hood lining is lower etc? I want to put a cage in and I love the look of yours but i am just trying to find out why you didnt put yours in, would it be possible if you didnt care about it covering the sunroof etc or did it just not fit period?

Cheers mate, matt

Link to comment
https://www.sau.com.au/forums/topic/67525-r33-rollcage/#findComment-1256688
Share on other sites

The reason is because the roof liner is too low, trust me ive ripped the whole liner out and the sunroof trying to fit it ..i even thought about getting it modified but just about every peice would have to be changed and u may as well get a whole new one made up .. the only way i could put it in is if i took the sunroof out and got the roof welded up and got a new roof liner from a non sunroof car ..

I havent posted a price because i want to swap it for some rims or a seat. But if someone put $900 in front of me they could take it home. But i would prefer to swap it ..

Link to comment
https://www.sau.com.au/forums/topic/67525-r33-rollcage/#findComment-1256717
Share on other sites

Mick

that cage is the hoop section behind the seats, the two sections that run down the 'A' pillars and the bars that link these sections along the top and bottom of the doors - yes? that means it has four body mounting points.

Mine had sections that extended into the rear of the car (no rear seat) and mounted at another two points. it seems in the pic that you don't have enough sections of bar to make up a full cage...

Link to comment
https://www.sau.com.au/forums/topic/67525-r33-rollcage/#findComment-1271821
Share on other sites

so has this, it has 6 mounting points, i supose its hard to visualise since its dismantled .. i may even assemble it in the lounge room for something to do and take a pic of it .. but trust me its a 6 point full rollcage

Link to comment
https://www.sau.com.au/forums/topic/67525-r33-rollcage/#findComment-1272102
Share on other sites

there is the hoop section, thats 2 points, then there are the two s shaped peices that run down the a pillars, thats another 2 points, then there are the two peices that have an angled plate on the end of them, they go from the top of the hoop section to the rear of the car thats the last 2 points, so thats 6 points that mount to the car, and there are two peices left, one goes between the two s shaped peices and the other one goes on an angle between the rear two peices ..

Link to comment
https://www.sau.com.au/forums/topic/67525-r33-rollcage/#findComment-1273031
Share on other sites

mine had additional bars that ran from the bottom of the hoop section along the bottom of the doors to the bottom of the S sections, + bars that ran from the back at the bottom of the hoop section to the mounts on top of the rear wheel arches+ a bar that ran between the rear mounts (where the back seat normally sat).

Link to comment
https://www.sau.com.au/forums/topic/67525-r33-rollcage/#findComment-1273638
Share on other sites

as far as i know the back seat is still usable and the cage doesnt interfere with anyone ..

the bars that go in to the rear of the car squeeze in on each side of the back seat.

You are welcome to come down and we can assemble it in the car to check, we can assemble it without actualy bolting it to the car, so it wont hurt to do it ..

Link to comment
https://www.sau.com.au/forums/topic/67525-r33-rollcage/#findComment-1276045
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
×
×
  • Create New...