Jump to content
SAU Community

88 Cefiro What to look for???? Help PLZ

S13Deviat

By S13Deviat,
in Four Door Family & Wagoneers

 Share

Recommended Posts

S13Deviat Grand Master

S13Deviat

Posted
Posted

Hey there guys & gals

I am hopefully picking up the cefiro in a few weeks time and was hoping i could get some sound advise on things to look for when inspecting it.

It seems to have a bit of drift setup on it (roll cage, exhaust etc) and seems to may of had a dorifto background.

Would you guys be able to recommend things / areas to look at on the car to ensure there is no serious issues with it! IE....engine bay...suspension...

I suppose just looking for advise from people who have picked up there Cefiro and what areas need to be inspected!

Many thanks in advance :)

Ando

Link to comment
https://www.sau.com.au/forums/topic/67591-88-cefiro-what-to-look-for-help-plz/
Share on other sites
someonestolecc Grand Master

someonestolecc

Posted
Posted

All usual engine stuff like compression and leak down test. Pull off the air inlet check turbo for shaft play/scraping etc.

Change all oils/fluids and look for chunks of metal or shavings (I got about 50 grams from my gearbox don't worry :) ).

Dyno to make sure the tune/AFR is ok.

Wheel alignment + balance good idea but if you wanna keep it drifty make sure you write the settings you want down and take it to the place.

Suspension rubber etc .. check that. Exhaust manifold, looks for leaks etc.

Tighten your door hinges .. i hate when doors sag ;)

Make sure the cage is in securely, make sure your seat is in securely, make sure your engine is in securely.

I'm sure there are heaps more things but they would relate to any car..

S13Deviat Grand Master

S13Deviat

Posted
  • Author
Posted

CC - Thanks man....seriously i will have to drop by and check out your ceffie sometime and get the low down on ceffie's....you know i am going to be over there with a case of beer once i get the car asking for help :);)

I work @ Gordon so i am going past your area every day.

I'll PM my details so let us know if you need a pair of extra hands to help out with the ceffie......as i mentioned before...not the mechanic, but love getting my hands dirty on cars

:wassup:

Ando

S13Deviat Grand Master

S13Deviat

Posted
  • Author
Posted

Once my Ceffie (a.k.a. the purple people eater....yes it has been named :cheers:) gets here we will defo have to organise a cruise!!! Get to know the ppl and faces behind the Cefiro posse! lol

someonestolecc Grand Master

someonestolecc

Posted
Posted

That's it.

Gordon heh my folks live at St Ives so yeah I'm fairly familiar with the area there.

No worries Ando thanks... unfortunately I don't know how to change a clutch or gearbox and that's the only MAJOR stuff comin up so I'm not sure :cheers:

Either way I'd be keen for a cruise when ya get your cef on the road.

S13Deviat Grand Master

S13Deviat

Posted
  • Author
Posted

Well when the ceffie is here i will count the # of cable ties and update you all :rofl: I suppose the less the better. She looks in good nick so hopefully it wont have that many *fingers crossed*

  • 2 weeks later...
BasketCase Collaborator

BasketCase

Posted
Posted

Ah the cable ties comp, My car so wins this... my drift ceffie came from japan with (these are the ones noticable. and we're not counting the ones that are in fact being used for their indended purpose, tieing cables.

2 holding front grill

4 big ones holding the oil cooler in + 2 metal brackets

4 holding the number plates on I have added the required screws.

10 holding various body kit components on.

3 holding a cold air funnel intake in place.

= 460 points

This is nothing to be proud of... If cable ties weren't invented my car would be in pieces. In fact most ceffies would be.

Although nothing has ever fallen off the car, and if it did I didn't know about it and ain't missing it!

someonestolecc Grand Master

someonestolecc

Posted
Posted

uhm.

lol

you're all amateurs :P

4 headlights

2 grill

2 front bar

4 power steering pump

1 wastegate actuator pipe

4 cable ties for the rear bar

3 boost tube related purposes

3 holding air shield

5 CAI pipe

7 ECU

10+ holding various rb20 dodgy left over wiring in the engine bay etc

that's off the top of my head, but every day brings a new adventure :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • sunsetR33
      Replacing turbo water line - any recommendations or advice?

      By sunsetR33 · Posted

      One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
×
×
  • Create New...