Jump to content
SAU Community

twin turbo needs 2bov's?

Driver

By Driver,
in Engines & Forced Induction

 Share

Recommended Posts

Wazz Community Regular

Wazz

Posted
Posted

wat sorta boost are you running would depend on weather you go 1 or 2... around 1 bar i'd assume you'd only need one near the plenum?(maybe a big one? greddy type r? :flamed: ) not to sure tho.. best bet ask sydneykid he claims he "doesnt" know everything... which i think is bullshit :bs!: :bs!:

Warrick

Driver Grand Master

Driver

Posted
  • Author
Posted

haha

I wana run a bit over 1 bar - so i do wana play it safe so i probly will get 2 bov's

well what im now thinkng - WHICH IM GONA NEED PEOPLES HELP ON!....

Is get either..

1.

TRUST Intercooler Kit to suit R34 GTR

R-SPL Type15 2 core. Standard intercooler replacement. 294 x 600 x 76 mm

or

2.

Use a crapo hybrid intercooler with custom piping.

What i need peoples help with is if a r34 gtr cooler kit will fit on my r34 gt-t with the gtr engine installed.

Do the 2 cars have the same setup?

besides the gtr where they cooler pipes goes thru the side of the car on the driver side

IanH Collaborator

IanH

Posted
Posted

The GTR FMIC pipe run is different to the GTT's. We've had to move the battery to the boot and use a GTST washer bottle so we can run the I/C pipe to the GTR plenum.

I'm still using the stock GTR re-circs at 1bar but I'm thinking of a single HKS SSQV although I didn't like the sound that much when I had one on my GTT.

My conversion is almost done (should have picked it up the weekend but got a week delay now) so I'll get some pictures up for you then.

Cheers.............................................IanH

paulr33 Grand Master

paulr33

Posted
Posted

perhaps you could ask inasnt (denham) he fitted twin gtr bovs to his gt30 setup.

i recall the reason behind it being good safe bov setup that was plumback and would avoid defects but was safe to use with high psi levels, well over 1 bar. see if you find the threads from his discussion, would have been about 1.5 years ago almost

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • Duncan
      M35 Brake caliper replacement

      By Duncan · Posted

      You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Duncan
      Most women will agree that parking is the most taxing part of driving

      By Duncan · Posted

      Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
×
×
  • Create New...