Jump to content
SAU Community

Recommended Posts

well i was on my way today after 3 months of having my car off the road due to importing it to finally getting rego for the car.

come inspection day and i have all my papers and everything. inspection is done and then they decided to reject my rego for three things

1. momo steering wheel

2. hks bov

3. pod

now i have to start from square one and get all my papers re-issued :hellpisd:

if any1 can help me with these items it would be really appriciated if you could help me out. i have an r32 gtst

thx

p.s vicroads fully sussed me out, and treated me like a criminal ... bastards....

Link to comment
https://www.sau.com.au/forums/topic/68199-rejected-rego-need-help/
Share on other sites

The Momo wheel should be ok, if it has the appropriate sticker on the back (like a price tag sticker with an approval number on it). The filter & BOV are technically modifications under ADR27C which makes them unlawful.

Sorry to hear about the mess mate. Can't help with any shops to help you out but I can comment on the legalities of the items they picked you up on.....

1. Any steering wheel that replaces the stock item must not be more than 1 inch (25mm) smaller than the original (not sure of EXACT size difference but the info shouldn't be too hard to track down) Also if the original has a padded center (which the std R32 one has) the replacement must also have one - same with an airbag.

2. Any bov that replaces the stock one MUST BE plumb-back type. Any venting to atmos isn't allowed.

3.Only ONE intake mod is allowed. ie if you have a FMI and a POD then you would have to remove one or the other. You are allowed a POD if you don't have an FMI.....

4.Apparently all Oz drivers have difficulty remembering the H pattern of a std gearbox and therefore all cars on ozzie road must display the 'H' pattern somewhere on the gearshift or surrounds. Now this is one of the stupidest rules I have come across however a simple sticker with the H pattern and gear No's on it stuck to the surround of the gearbox with solve the problem.

Anyway hope the info helps and you get your car on the road.....

thx for the info mate

i told the inspector that i was allowed the pod filter because i didnt have a cooler... he still wanted to see a box around it ............................. ..................................................................... i hate him

can some1 give me like evidence that im allowed a pod filter with no box? i really cbf getting a stock airbox

hmmmm I can tell you 110% that an uncovered POD with NO OTHER mod to the intake system is legal....if in doubt call the EPA for a ruling. The inspector (like 1/2 of them out there) doesn't seem to know a whole lot about cars/skylines and the ADRs. Maybe get the EPA to send a faxed copy of the ruling that you could show the vicroads inspector???

oh shit, im going to the dandenong office on thursday to get my gtr registered, i still have the pods on mine as well. i thought all they looked at was the VIN and engine number and u r outta there. does anyone have a spare air box lying around that i could use for the day?? which office would be the best to go to guys?? thanks heeps

hmmmm I can tell you 110% that an uncovered POD with NO OTHER mod to the intake system is legal....if in doubt call the EPA for a ruling.  The inspector (like 1/2 of them out there) doesn't seem to know a whole lot about cars/skylines and the ADRs. Maybe get the EPA to send a faxed copy of the ruling that you could show the vicroads inspector???

pretty sure oiled types are illegal if not covered also...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...