Jump to content
SAU Community

World Record....?


Recommended Posts

Apparently the ultimate warrior is gay...that explans why you like him :D

Though, he never returned my fan mail as a kid so he musnt have been a patter ass:)

That is a brilliant result with the 2530s, congrats. Not knowing your tyre size it looks like the dyno run was stopped at about 7,800 - 8,000rpm. The setup seems to pull hard all the way to over 8,000rpm with the power figure not falling over.:)

Are you running a PFc? Are you able to give us an approximation of the difference in inlet temps between say 1bar and 1.7bar?

Congrats again, the car looks trick and has plenty of mumbo, shame its a drag car not a circuit car:)..................................................j/k

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

Don't you remember us Gav.....we are the ones who do cryogenic treatment. The run was to 8000...our redline is 9200. The rods and crank are stock and our diff ratios are too.

Yer - course I remember the "discussion" :D

The reson that I'm asking is that before I destroyed my recently rebuilt engine, I passed the traps on the quarter spot on 200km/h and the tacho was around 8500. Unfortunately I never got a chance to see what the GT-RS terbs could really do in anger, but I reckon I've got the right "ingredients" to chase your outstanding result.

BTW - looks like I'm gunna have another chance for that cryotreatment!

Guest two.06l
Though, he never returned my fan mail as a kid so he musnt have been a patter ass:)

That is a brilliant result with the 2530s, congrats.  Not knowing your tyre size it looks like the dyno run was stopped at about 7,800 - 8,000rpm.  The setup seems to pull hard all the way to over 8,000rpm with the power figure not falling over.:D

Are you running a PFc?  Are you able to give us an approximation of the difference in inlet temps between say 1bar and 1.7bar?

Congrats again, the car looks trick and has plenty of mumbo, shame its a drag car not a circuit car:)..................................................j/k

Thanks Roy

you are right on the money with the 7800-8000 estimate

we are running power fc . An inlet temp comparison can't be given....but we used to run a thermocouple in the plenum, with only ever 4-6 degrees above ambient recorded.

Hey Roy, its a street car...................lol

Guest two.06l
Yer - course I remember the "discussion"  :D  

The reson that I'm asking is that before I destroyed my recently rebuilt engine, I passed the traps on the quarter spot on 200km/h and the tacho was around 8500.  Unfortunately I never got a chance to see what the GT-RS terbs could really do in anger, but I reckon I've got the right "ingredients" to chase your outstanding result.

BTW - looks like I'm gunna have another chance for that cryotreatment!

What happened to the engine?

What was your MPH/ET?

Go the cyro buddy, for the price you'd be mad not to.

Just because you have the ingredients does not mean you can bake the cake.

Good luck with your build, and see you on the strip.

True that on the "ingredients". Will get there 'tho!

11.68 @ 124 mph, with what was a "conservative" tune on 17 psi boost and supposedly conservative timing. Just worked out why the tacho was out - was running MT slicks on the back!

Don't really want to go into what happened to the motor on public forum, water under the bridge with a Perth tuner

Guest two.06l
True that on the "ingredients".  Will get there 'tho!

11.68 @ 124 mph, with what was a "conservative" tune on 17 psi boost and supposedly conservative timing.  Just worked out why the tacho was out - was running MT slicks on the back!

Don't really want to go into what happened to the motor on public forum, water under the bridge with a Perth tuner

Yeah the reason why we built a new engine was due to a (and i use this term very loosely) tuner. We only use the best now, he might be expensive but its a hell of a lot cheaper than a rebuild.

Getting a cro-moly cage fitted tomorrow, as 10s are on the cards.

Paul, who is doing the cage for you? Care to pass on some details as I might know someone who might be needing one in the not to distant future.

One thing that really impresses me is the fat power band. Plenty of power and average HP is very high, not peaky like some dyno queens. Well done again.

Guest two.06l
Paul, who is doing the cage for you? Care to pass on some details as I might know someone who might be needing one in the not to distant future.

One thing that really impresses me is the fat power band. Plenty of power and average HP is very high, not peaky like some dyno queens. Well done again.

A fellow by the name of Adam, Croydons put me on to him as he does all their work. when you need him let me know and ill pass your details onto him. Seen some of his work on the weekend and it is indeed "the sh1t".

Guest two.06l
Saw it out there on Friday and it looked fantastic! :D

What sort of fuel system do you run?

should have came and said hi, we run intank Bosch (swimmer pump 500hp) which feeds a 2 litre surge tank feeding two Bosch motorsport pumps (044). dual fuel lines connect to a TRUST twin entry fuel rail with SARD 720cc injectors. Then it is centre tapped to a SARD regulator feeding back to the surge tank. The whole system uses 3/8 braided lines with Earls connectors.

Guest two.06l
In this months hpi M-speed japan have a race car GTR runing 2.8lt with 2530s making 630ps or 636hp dosent say what fuel they are runing.

If its a race car id say its using race fuel not pump, spoke to Jim at Croydon's today and he's getting very excited about the cars potential for more! Like running 32psi instead of 27psi and better boost control and more fine tuning.

Guest two.06l
Mate whats Jims thoughts on pushing standard rods to this limit or past it?

Jims view is the rods are ok its the bolts and bearings as well as the clearances used. He has another car in the shop making over 500kw with stock rods. We break one it will be back to the ol' drawing board! Hope you haven't put the omen on us.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...