Jump to content
SAU Community

Recommended Posts

Yes you do need a current drivers license. It is a requirement of the insurance we take out for the day. I have confirmed this as we had someone with a suspended license last track day and had to cancel their participation.

what exciting insurance do we receive on the day? I dont get insurance on the road, ill be extremely happy to receive it on the track.

Note: I know its probably public liability or the likes of that

  • 3 weeks later...

alright i'm lost. Is this day going to go ahead or are the numbers short? Has anybody asked the supra boys whether they would like to share, or anyone else for that matter? because if this day is not going ahead, i'll go to the may 9th track day etc.....

is that the plan? or are all spots on the may ninth day filled?

cheers, Mark

Mark, I'll clarify:

Sunday May 22 - Only has about 14 people signed up. It looks like being cancelled.

Monday May 9 - Has enough people claiming to come but not enough payments. Past history tells me people are not coming until the cash is in the bank. So this day is also in trouble.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...