Jump to content
SAU Community

Recommended Posts

The airbag steering wheel just comes off - no big deal, if you want to swap it to a aftermarket one (non-airbag one) shouldn't be a problem (except for your local road laws)....

With a HKS 2530 turbo, it will make aorund 220-230rwkw, running out of puff up top end.

The airbag steering wheel just comes off - no big deal, if you want to swap it to a aftermarket one (non-airbag one) shouldn't be a problem (except for your local road laws)....  

With a HKS 2530 turbo, it will make aorund 220-230rwkw, running out of puff up top end.

Sounds about right, i had a stock turbo on my last R33 with no where near as many mods and that was pulling 263hp @ the wheels on the dyno so thats about 200kw @ the wheels.

230 KW is around 308 hp so yeh. Ill find out when i get it tuned anyway.

  • 3 weeks later...

hey mate... very nice car.

id just remove the creatd stickers... leave the rest on... looks drift.

just wondering.... what is the ride hight?? from the ground to the lowest point on the car??

i have a 400r kit on my 33, coilovers and 18" rims. its just above 100mm off the ground, the lowest part being the back of the skirts. but there is still about 1" between the tires and the guards.. on yours, the tyres are very close to the guards, but its not scraping on the ground. just wondering if my kit is deeper then the top secret one and yours alows you to lower the car further but keeping it legal.

cheers

Linton

hey mate... very nice car.

id just remove the creatd stickers... leave the rest on... looks drift.

just wondering.... what is the ride hight?? from the ground to the lowest point on the car??

i have a 400r kit on my 33, coilovers and 18" rims. its just above 100mm off the ground, the lowest part being the back of the skirts. but there is still about 1" between the tires and the guards.. on yours, the tyres are very close to the guards, but its not scraping on the ground. just wondering if my kit is deeper then the top secret one and yours alows you to lower the car further but keeping it legal.

cheers

Linton

Im not exactly sure of the height at the moment but it can definetly go alot lower,It is fully jacked up at the moment and it is just posible to get up the kirbs, i can lower it back to how it was set up for drift but it would be to inpracticle.

In the pics the guy had before i bought it the wheels were well and truly inside the gaurds and nothing was scraping so yeh must be the depth of the kit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...